Merge remote-tracking branch 'upstream/Development' into independent_pid
This commit is contained in:
grob6000
commit
0877aa0fe0
BIN
Documentation/Logo/Marlin Logo LCD High.png
Normal file
BIN
Documentation/Logo/Marlin Logo LCD High.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 392 B |
BIN
Documentation/Logo/Marlin Logo LCD Low.png
Normal file
BIN
Documentation/Logo/Marlin Logo LCD Low.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 249 B |
@ -24,8 +24,11 @@
|
||||
// User-specified version info of this build to display in [Pronterface, etc] terminal window during
|
||||
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
|
||||
// build by the user have been successfully uploaded into firmware.
|
||||
#define STRING_VERSION "v1.0.2"
|
||||
#define STRING_URL "reprap.org"
|
||||
#define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
|
||||
#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
|
||||
#define STRING_SPLASH STRING_VERSION " - " STRING_URL // will be shown during bootup
|
||||
|
||||
// SERIAL_PORT selects which serial port should be used for communication with the host.
|
||||
// This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
|
||||
@ -297,7 +297,7 @@
|
||||
// using:
|
||||
//#define MENU_ADDAUTOSTART
|
||||
|
||||
// Show a progress bar on the LCD when printing from SD?
|
||||
// Show a progress bar on HD44780 LCDs for SD printing
|
||||
//#define LCD_PROGRESS_BAR
|
||||
|
||||
#ifdef LCD_PROGRESS_BAR
|
||||
@ -309,6 +309,12 @@
|
||||
#define PROGRESS_MSG_EXPIRE 0
|
||||
// Enable this to show messages for MSG_TIME then hide them
|
||||
//#define PROGRESS_MSG_ONCE
|
||||
#ifdef DOGLCD
|
||||
#warning LCD_PROGRESS_BAR does not apply to graphical displays at this time.
|
||||
#endif
|
||||
#ifdef FILAMENT_LCD_DISPLAY
|
||||
#error LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both.
|
||||
#endif
|
||||
#endif
|
||||
|
||||
// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
|
||||
|
||||
@ -1,28 +1,78 @@
|
||||
#define START_BMPWIDTH 60 //Width in pixels - http://www.digole.com/tools/PicturetoC_Hex_converter.php
|
||||
#define START_BMPHEIGHT 64 //Height in pixels
|
||||
#define START_BMPBYTEWIDTH 8 //Width in bytes
|
||||
const unsigned char start_bmp[574] PROGMEM = { //AVR-GCC, WinAVR
|
||||
0x1f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
|
||||
0x30,0x00,0x00,0x00,0x00,0x00,0x3f,0xff,
|
||||
0x40,0x00,0x00,0x00,0x00,0x00,0x1f,0xff,
|
||||
0xc0,0x00,0x00,0x00,0x00,0x00,0x0f,0xff,
|
||||
0x80,0x83,0x00,0x00,0x01,0x80,0x07,0xff,
|
||||
0x83,0xef,0xc0,0x00,0x01,0x8c,0x03,0xff,
|
||||
0x87,0xff,0xe0,0x00,0x01,0x8c,0x01,0xff,
|
||||
0x8e,0x38,0x60,0x00,0x01,0x80,0x00,0xff,
|
||||
0x8c,0x18,0x67,0xe0,0xf9,0x8c,0x7e,0x7f,
|
||||
0x8c,0x18,0x6f,0xf1,0xfd,0x8c,0xfe,0x3f,
|
||||
0x8c,0x18,0x6e,0x31,0x8d,0x8c,0xc7,0x1f,
|
||||
0x8c,0x18,0x6c,0x39,0x8d,0x8c,0xc3,0x1f,
|
||||
0x8c,0x18,0x6c,0x19,0x81,0x8c,0xc3,0x1f,
|
||||
0x8c,0x18,0x6e,0x19,0x81,0x8c,0xc3,0x1f,
|
||||
0x8c,0x18,0x6f,0x9f,0x81,0xef,0xc3,0x1f,
|
||||
0x8c,0x18,0x67,0xdf,0x80,0xef,0xc3,0x1f,
|
||||
0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x1f,
|
||||
0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x2f,
|
||||
0x30,0x00,0x00,0x00,0x00,0x00,0x00,0xcf,
|
||||
0x1f,0xff,0xff,0xff,0xff,0xff,0xff,0x8f
|
||||
};
|
||||
// BitMap for splashscreen
|
||||
// Generated with: http://www.digole.com/tools/PicturetoC_Hex_converter.php
|
||||
// Please note that using the high-res version takes about 0.5KB of
|
||||
#ifdef START_BMPHIGH
|
||||
#define START_BMPWIDTH 112
|
||||
#define START_BMPHEIGHT 38
|
||||
#define START_BMPBYTEWIDTH 14
|
||||
#define START_BMPBYTES 532 // START_BMPWIDTH * START_BMPHEIGHT / 8
|
||||
|
||||
const unsigned char start_bmp[START_BMPBYTES] PROGMEM = {
|
||||
0x01,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff
|
||||
,0x0f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff
|
||||
,0x1e,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0xff,0xff
|
||||
,0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0xff,0xff
|
||||
,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0xff,0xff
|
||||
,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xff,0xff
|
||||
,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7f,0xff
|
||||
,0xc0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x78,0x00,0x00,0x3f,0xff
|
||||
,0xc0,0x0f,0xc0,0xfc,0x00,0x00,0x00,0x00,0x00,0x78,0x18,0x00,0x1f,0xff
|
||||
,0xc0,0x3f,0xe1,0xff,0x00,0x00,0x00,0x00,0x00,0x78,0x3c,0x00,0x0f,0xff
|
||||
,0xc0,0x7f,0xf3,0xff,0x80,0x00,0x00,0x00,0x00,0x78,0x3c,0x00,0x07,0xff
|
||||
,0xc0,0xff,0xff,0xff,0xc0,0x00,0x00,0x00,0x00,0x78,0x3c,0x00,0x03,0xff
|
||||
,0xc1,0xf8,0x7f,0x87,0xe0,0x00,0x00,0x00,0x00,0x78,0x00,0x00,0x01,0xff
|
||||
,0xc1,0xf0,0x3f,0x03,0xe0,0x00,0x00,0x00,0x00,0x78,0x00,0x00,0x00,0xff
|
||||
,0xc1,0xe0,0x1e,0x01,0xe0,0x1f,0x00,0x03,0xe0,0x78,0x3c,0x03,0xf0,0x7f
|
||||
,0xc1,0xe0,0x1e,0x01,0xe0,0x7f,0xc0,0x0f,0xf8,0x78,0x3c,0x07,0xfc,0x3f
|
||||
,0xc1,0xe0,0x1e,0x01,0xe1,0xff,0xe0,0x1f,0xfc,0x78,0x3c,0x0f,0xfe,0x1f
|
||||
,0xc1,0xe0,0x1e,0x01,0xe3,0xff,0xf0,0x3f,0xfe,0x78,0x3c,0x1f,0xfe,0x0f
|
||||
,0xc1,0xe0,0x1e,0x01,0xe3,0xf3,0xf8,0x3f,0x3e,0x78,0x3c,0x3f,0x3f,0x07
|
||||
,0xc1,0xe0,0x1e,0x01,0xe7,0xe0,0xfc,0x7c,0x1f,0x78,0x3c,0x3e,0x1f,0x07
|
||||
,0xc1,0xe0,0x1e,0x01,0xe7,0xc0,0x7c,0x7c,0x0f,0x78,0x3c,0x3c,0x0f,0x03
|
||||
,0xc1,0xe0,0x1e,0x01,0xe7,0x80,0x7c,0x78,0x0f,0x78,0x3c,0x3c,0x0f,0x03
|
||||
,0xc1,0xe0,0x1e,0x01,0xe7,0x80,0x3c,0x78,0x00,0x78,0x3c,0x3c,0x0f,0x03
|
||||
,0xc1,0xe0,0x1e,0x01,0xe7,0x80,0x3c,0x78,0x00,0x78,0x3c,0x3c,0x0f,0x03
|
||||
,0xc1,0xe0,0x1e,0x01,0xe7,0x80,0x3c,0x78,0x00,0x78,0x3c,0x3c,0x0f,0x03
|
||||
,0xc1,0xe0,0x1e,0x01,0xe7,0xc0,0x3c,0x78,0x00,0x78,0x3c,0x3c,0x0f,0x03
|
||||
,0xc1,0xe0,0x1e,0x01,0xe3,0xe0,0x3c,0x78,0x00,0x7c,0x3c,0x3c,0x0f,0x03
|
||||
,0xc1,0xe0,0x1e,0x01,0xe3,0xff,0x3f,0xf8,0x00,0x7f,0xbc,0x3c,0x0f,0x03
|
||||
,0xc1,0xe0,0x1e,0x01,0xe1,0xff,0x3f,0xf8,0x00,0x3f,0xbf,0xfc,0x0f,0x03
|
||||
,0xc1,0xe0,0x1e,0x01,0xe0,0xff,0x3f,0xf8,0x00,0x1f,0xbf,0xfc,0x0f,0x03
|
||||
,0xc1,0xe0,0x1e,0x01,0xe0,0x7f,0x3f,0xf8,0x00,0x0f,0xbf,0xfc,0x0f,0x03
|
||||
,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07
|
||||
,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x06
|
||||
,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0e
|
||||
,0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1c
|
||||
,0x1e,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x78
|
||||
,0x0f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xf0
|
||||
,0x01,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x80 };
|
||||
#else
|
||||
#define START_BMPWIDTH 56
|
||||
#define START_BMPHEIGHT 19
|
||||
#define START_BMPBYTEWIDTH 7
|
||||
#define START_BMPBYTES 133 // START_BMPWIDTH * START_BMPHEIGHT / 8
|
||||
|
||||
const unsigned char start_bmp[START_BMPBYTES] PROGMEM = {
|
||||
0x1f,0xff,0xff,0xff,0xff,0xff,0xff
|
||||
,0x60,0x00,0x00,0x00,0x00,0x01,0xff
|
||||
,0x40,0x00,0x00,0x00,0x00,0x00,0xff
|
||||
,0x80,0x00,0x00,0x00,0x00,0x00,0x7f
|
||||
,0x83,0xcf,0x00,0x00,0x0c,0x30,0x3f
|
||||
,0x87,0xff,0x80,0x00,0x0c,0x30,0x1f
|
||||
,0x86,0x79,0x80,0x00,0x0c,0x00,0x0f
|
||||
,0x8c,0x30,0xc7,0x83,0x8c,0x30,0xe7
|
||||
,0x8c,0x30,0xcf,0xc7,0xcc,0x31,0xf3
|
||||
,0x8c,0x30,0xdc,0xec,0xec,0x33,0xb9
|
||||
,0x8c,0x30,0xd8,0x6c,0x6c,0x33,0x19
|
||||
,0x8c,0x30,0xd0,0x6c,0x0c,0x33,0x19
|
||||
,0x8c,0x30,0xd8,0x6c,0x0c,0x33,0x19
|
||||
,0x8c,0x30,0xdc,0x6c,0x0e,0x3b,0x19
|
||||
,0x8c,0x30,0xcf,0x7c,0x07,0x9f,0x19
|
||||
,0x8c,0x30,0xc7,0x7c,0x03,0x8f,0x19
|
||||
,0x40,0x00,0x00,0x00,0x00,0x00,0x02
|
||||
,0x60,0x00,0x00,0x00,0x00,0x00,0x06
|
||||
,0x1f,0xff,0xff,0xff,0xff,0xff,0xf8 };
|
||||
#endif
|
||||
|
||||
// Here comes a compile-time operation to match the extruder symbols
|
||||
// on the info screen to the set number of extruders in configuration.h
|
||||
|
||||
@ -11,9 +11,10 @@
|
||||
* License: http://opensource.org/licenses/BSD-3-Clause
|
||||
*/
|
||||
|
||||
#ifndef DOGM_LCD_IMPLEMENTATION_H
|
||||
#define DOGM_LCD_IMPLEMENTATION_H
|
||||
|
||||
#ifndef ULTRA_LCD_IMPLEMENTATION_DOGM_H
|
||||
#define ULTRA_LCD_IMPLEMENTATION_DOGM_H
|
||||
#define MARLIN_VERSION "1.0.2"
|
||||
|
||||
/**
|
||||
* Implementation of the LCD display routines for a DOGM128 graphic display. These are common LCD 128x64 pixel graphic displays.
|
||||
@ -87,16 +88,26 @@ U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0
|
||||
|
||||
static void lcd_implementation_init()
|
||||
{
|
||||
#ifdef LCD_PIN_BL
|
||||
pinMode(LCD_PIN_BL, OUTPUT); // Enable LCD backlight
|
||||
#ifdef LCD_PIN_BL // Enable LCD backlight
|
||||
pinMode(LCD_PIN_BL, OUTPUT);
|
||||
digitalWrite(LCD_PIN_BL, HIGH);
|
||||
#endif
|
||||
|
||||
u8g.setContrast(lcd_contrast);
|
||||
// FIXME: remove this workaround
|
||||
// Uncomment this if you have the first generation (V1.10) of STBs board
|
||||
// pinMode(17, OUTPUT); // Enable LCD backlight
|
||||
// digitalWrite(17, HIGH);
|
||||
|
||||
#ifdef LCD_SCREEN_ROT_90
|
||||
u8g.setRot90(); // Rotate screen by 90°
|
||||
#elif defined(LCD_SCREEN_ROT_180)
|
||||
u8g.setRot180(); // Rotate screen by 180°
|
||||
#elif defined(LCD_SCREEN_ROT_270)
|
||||
u8g.setRot270(); // Rotate screen by 270°
|
||||
#endif
|
||||
|
||||
// FIXME: whats the purpose of the box? Maybe clear screen?
|
||||
u8g.firstPage();
|
||||
do {
|
||||
u8g.setFont(u8g_font_6x10_marlin);
|
||||
@ -105,55 +116,31 @@ static void lcd_implementation_init()
|
||||
u8g.setColorIndex(1);
|
||||
} while(u8g.nextPage());
|
||||
|
||||
#ifdef LCD_SCREEN_ROT_90
|
||||
u8g.setRot90(); // Rotate screen by 90°
|
||||
#endif
|
||||
|
||||
#ifdef LCD_SCREEN_ROT_180
|
||||
u8g.setRot180(); // Rotate screen by 180°
|
||||
#endif
|
||||
|
||||
#ifdef LCD_SCREEN_ROT_270
|
||||
u8g.setRot270(); // Rotate screen by 270°
|
||||
#endif
|
||||
|
||||
|
||||
// Show splashscreen
|
||||
int off = (u8g.getWidth() - START_BMPWIDTH) / 2;
|
||||
int txtX = (u8g.getWidth() - sizeof(STRING_SPLASH) - 1) / 2;
|
||||
int txtY = u8g.getHeight() - 10;
|
||||
u8g.firstPage();
|
||||
do {
|
||||
// RepRap init bmp
|
||||
u8g.drawBitmapP(7,7,START_BMPBYTEWIDTH,START_BMPHEIGHT,start_bmp);
|
||||
// Welcome message
|
||||
|
||||
|
||||
#ifdef START_BMPHIGH
|
||||
u8g.drawBitmapP(off, off, START_BMPBYTEWIDTH, START_BMPHEIGHT, start_bmp);
|
||||
#else
|
||||
u8g.setScale2x2();
|
||||
u8g.drawBitmapP(off, off, START_BMPBYTEWIDTH, START_BMPHEIGHT, start_bmp);
|
||||
u8g.undoScale();
|
||||
#endif
|
||||
|
||||
u8g.setFont(u8g_font_5x8);
|
||||
u8g.drawStr(7,51,"V1.0.2 - marlin.reprap.org");
|
||||
|
||||
u8g.drawStr(txtX, txtY, STRING_SPLASH);
|
||||
} while(u8g.nextPage());
|
||||
}
|
||||
|
||||
static void lcd_implementation_clear()
|
||||
{
|
||||
// NO NEED TO IMPLEMENT LIKE SO. Picture loop automatically clears the display.
|
||||
//
|
||||
// Check this article: http://arduino.cc/forum/index.php?topic=91395.25;wap2
|
||||
//
|
||||
// u8g.firstPage();
|
||||
// do {
|
||||
// u8g.setColorIndex(0);
|
||||
// u8g.drawBox (0, 0, u8g.getWidth(), u8g.getHeight());
|
||||
// u8g.setColorIndex(1);
|
||||
// } while( u8g.nextPage() );
|
||||
}
|
||||
static void lcd_implementation_clear() { } // Automatically cleared by Picture Loop
|
||||
|
||||
/* Arduino < 1.0.0 is missing a function to print PROGMEM strings, so we need to implement our own */
|
||||
static void lcd_printPGM(const char* str)
|
||||
{
|
||||
static void lcd_printPGM(const char* str) {
|
||||
char c;
|
||||
while((c = pgm_read_byte(str++)) != '\0')
|
||||
{
|
||||
u8g.print(c);
|
||||
}
|
||||
while ((c = pgm_read_byte(str++))) u8g.print(c);
|
||||
}
|
||||
|
||||
static void _draw_heater_status(int x, int heater) {
|
||||
@ -176,8 +163,7 @@ static void _draw_heater_status(int x, int heater) {
|
||||
}
|
||||
}
|
||||
|
||||
static void lcd_implementation_status_screen()
|
||||
{
|
||||
static void lcd_implementation_status_screen() {
|
||||
|
||||
static unsigned char fan_rot = 0;
|
||||
|
||||
@ -192,30 +178,26 @@ static void lcd_implementation_status_screen()
|
||||
u8g.drawBox(50,44,2,5);
|
||||
u8g.drawFrame(42,49,10,4);
|
||||
u8g.drawPixel(50,43);
|
||||
// Progress bar
|
||||
|
||||
// Progress bar frame
|
||||
u8g.drawFrame(54,49,73,4);
|
||||
|
||||
// SD Card Progress bar and clock
|
||||
u8g.setFont(FONT_STATUSMENU);
|
||||
|
||||
if (IS_SD_PRINTING)
|
||||
{
|
||||
// Progress bar
|
||||
u8g.drawBox(55,50, (unsigned int)( (71 * card.percentDone())/100) ,2);
|
||||
}
|
||||
else {
|
||||
// do nothing
|
||||
if (IS_SD_PRINTING) {
|
||||
// Progress bar solid part
|
||||
u8g.drawBox(55, 50, (unsigned int)(71.f * card.percentDone() / 100.f), 2);
|
||||
}
|
||||
|
||||
u8g.setPrintPos(80,47);
|
||||
if(starttime != 0)
|
||||
{
|
||||
if (starttime != 0) {
|
||||
uint16_t time = millis()/60000 - starttime/60000;
|
||||
|
||||
u8g.print(itostr2(time/60));
|
||||
u8g.print(':');
|
||||
u8g.print(itostr2(time%60));
|
||||
}else{
|
||||
}
|
||||
else {
|
||||
lcd_printPGM(PSTR("--:--"));
|
||||
}
|
||||
#endif
|
||||
@ -242,7 +224,6 @@ static void lcd_implementation_status_screen()
|
||||
u8g.print("---");
|
||||
#endif
|
||||
|
||||
|
||||
// X, Y, Z-Coordinates
|
||||
u8g.setFont(FONT_STATUSMENU);
|
||||
u8g.drawBox(0,29,128,10);
|
||||
@ -282,11 +263,10 @@ static void lcd_implementation_status_screen()
|
||||
#ifndef FILAMENT_LCD_DISPLAY
|
||||
u8g.print(lcd_status_message);
|
||||
#else
|
||||
if(message_millis+5000>millis()){ //Display both Status message line and Filament display on the last line
|
||||
if (millis() < message_millis + 5000) { //Display both Status message line and Filament display on the last line
|
||||
u8g.print(lcd_status_message);
|
||||
}
|
||||
else
|
||||
{
|
||||
else {
|
||||
lcd_printPGM(PSTR("dia:"));
|
||||
u8g.print(ftostr12ns(filament_width_meas));
|
||||
lcd_printPGM(PSTR(" factor:"));
|
||||
@ -294,35 +274,31 @@ static void lcd_implementation_status_screen()
|
||||
u8g.print('%');
|
||||
}
|
||||
#endif
|
||||
|
||||
}
|
||||
|
||||
static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char)
|
||||
{
|
||||
static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char) {
|
||||
char c;
|
||||
|
||||
uint8_t n = LCD_WIDTH - 1 - 2;
|
||||
|
||||
if ((pre_char == '>') || (pre_char == LCD_STR_UPLEVEL[0] ))
|
||||
{
|
||||
if ((pre_char == '>') || (pre_char == LCD_STR_UPLEVEL[0] )) {
|
||||
u8g.setColorIndex(1); // black on white
|
||||
u8g.drawBox (0, row*DOG_CHAR_HEIGHT + 3, 128, DOG_CHAR_HEIGHT);
|
||||
u8g.setColorIndex(0); // following text must be white on black
|
||||
} else u8g.setColorIndex(1); // unmarked text is black on white
|
||||
}
|
||||
else {
|
||||
u8g.setColorIndex(1); // unmarked text is black on white
|
||||
}
|
||||
|
||||
u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
|
||||
u8g.print(pre_char == '>' ? ' ' : pre_char); // Row selector is obsolete
|
||||
|
||||
|
||||
while( (c = pgm_read_byte(pstr)) != '\0' )
|
||||
{
|
||||
while((c = pgm_read_byte(pstr))) {
|
||||
u8g.print(c);
|
||||
pstr++;
|
||||
n--;
|
||||
}
|
||||
while(n--){
|
||||
u8g.print(' ');
|
||||
}
|
||||
while(n--) u8g.print(' ');
|
||||
|
||||
u8g.print(post_char);
|
||||
u8g.print(' ');
|
||||
@ -391,8 +367,7 @@ static void _drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char p
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_bool_selected(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_bool(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
||||
|
||||
void lcd_implementation_drawedit(const char* pstr, char* value)
|
||||
{
|
||||
void lcd_implementation_drawedit(const char* pstr, char* value) {
|
||||
u8g.setPrintPos(0 * DOG_CHAR_WIDTH_LARGE, (u8g.getHeight() - 1 - DOG_CHAR_HEIGHT_LARGE) - (1 * DOG_CHAR_HEIGHT_LARGE) - START_ROW );
|
||||
u8g.setFont(u8g_font_9x18);
|
||||
lcd_printPGM(pstr);
|
||||
@ -445,13 +420,10 @@ static void _drawmenu_sd(uint8_t row, const char* pstr, const char* filename, ch
|
||||
#define lcd_implementation_drawmenu_function_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
|
||||
#define lcd_implementation_drawmenu_function(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
|
||||
|
||||
static void lcd_implementation_quick_feedback()
|
||||
{
|
||||
|
||||
static void lcd_implementation_quick_feedback() {
|
||||
#if BEEPER > -1
|
||||
SET_OUTPUT(BEEPER);
|
||||
for(int8_t i=0;i<10;i++)
|
||||
{
|
||||
for(int8_t i=0; i<10; i++) {
|
||||
WRITE(BEEPER,HIGH);
|
||||
delay(3);
|
||||
WRITE(BEEPER,LOW);
|
||||
@ -459,6 +431,5 @@ static void lcd_implementation_quick_feedback()
|
||||
}
|
||||
#endif
|
||||
}
|
||||
#endif//ULTRA_LCD_IMPLEMENTATION_DOGM_H
|
||||
|
||||
|
||||
#endif //__DOGM_LCD_IMPLEMENTATION_H
|
||||
|
||||
@ -196,7 +196,7 @@ static void lcd_goto_menu(menuFunc_t menu, const uint32_t encoder=0, const bool
|
||||
if (feedback) lcd_quick_feedback();
|
||||
|
||||
// For LCD_PROGRESS_BAR re-initialize the custom characters
|
||||
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
|
||||
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
|
||||
lcd_set_custom_characters(menu == lcd_status_screen);
|
||||
#endif
|
||||
}
|
||||
@ -205,7 +205,7 @@ static void lcd_goto_menu(menuFunc_t menu, const uint32_t encoder=0, const bool
|
||||
/* Main status screen. It's up to the implementation specific part to show what is needed. As this is very display dependent */
|
||||
static void lcd_status_screen()
|
||||
{
|
||||
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
|
||||
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
|
||||
uint16_t mil = millis();
|
||||
#ifndef PROGRESS_MSG_ONCE
|
||||
if (mil > progressBarTick + PROGRESS_BAR_MSG_TIME + PROGRESS_BAR_BAR_TIME) {
|
||||
@ -237,11 +237,12 @@ static void lcd_status_screen()
|
||||
lcd_status_update_delay--;
|
||||
else
|
||||
lcdDrawUpdate = 1;
|
||||
if (lcdDrawUpdate)
|
||||
{
|
||||
|
||||
if (lcdDrawUpdate) {
|
||||
lcd_implementation_status_screen();
|
||||
lcd_status_update_delay = 10; /* redraw the main screen every second. This is easier then trying keep track of all things that change on the screen */
|
||||
}
|
||||
|
||||
#ifdef ULTIPANEL
|
||||
|
||||
bool current_click = LCD_CLICKED;
|
||||
@ -266,7 +267,7 @@ static void lcd_status_screen()
|
||||
{
|
||||
lcd_goto_menu(lcd_main_menu);
|
||||
lcd_implementation_init( // to maybe revive the LCD if static electricity killed it.
|
||||
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
|
||||
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
|
||||
currentMenu == lcd_status_screen
|
||||
#endif
|
||||
);
|
||||
@ -1216,7 +1217,7 @@ void lcd_update()
|
||||
lcdDrawUpdate = 2;
|
||||
lcd_oldcardstatus = IS_SD_INSERTED;
|
||||
lcd_implementation_init( // to maybe revive the LCD if static electricity killed it.
|
||||
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
|
||||
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
|
||||
currentMenu == lcd_status_screen
|
||||
#endif
|
||||
);
|
||||
@ -1319,7 +1320,7 @@ void lcd_finishstatus() {
|
||||
}
|
||||
}
|
||||
lcd_status_message[LCD_WIDTH] = '\0';
|
||||
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT)
|
||||
#if defined(LCD_PROGRESS_BAR) && defined(SDSUPPORT) && !defined(DOGLCD)
|
||||
#if PROGRESS_MSG_EXPIRE > 0
|
||||
messageTick =
|
||||
#endif
|
||||
|
||||
Loading…
Reference in New Issue
Block a user