Put DISTINCT_E_FACTORS adjacent to the affected settings

This commit is contained in:
Scott Lahteine 2017-04-29 05:37:46 -05:00
parent 0dbe4b3e54
commit 54751e8557
27 changed files with 189 additions and 162 deletions

View File

@ -133,9 +133,6 @@
// :[1, 2, 3, 4, 5] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -464,12 +461,16 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/**
* With this option each E stepper can have its own factors for the
* following movement settings. If fewer factors are given than the
* total number of extruders, the last value applies to the rest.
*/
//#define DISTINCT_E_FACTORS
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92

View File

@ -134,9 +134,6 @@
// :[1, 2, 3, 4, 5] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 3 #define EXTRUDERS 3
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -463,12 +460,16 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/**
* With this option each E stepper can have its own factors for the
* following movement settings. If fewer factors are given than the
* total number of extruders, the last value applies to the rest.
*/
//#define DISTINCT_E_FACTORS
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92

View File

@ -133,9 +133,6 @@
// :[1, 2, 3, 4, 5] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -447,12 +444,16 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/**
* With this option each E stepper can have its own factors for the
* following movement settings. If fewer factors are given than the
* total number of extruders, the last value applies to the rest.
*/
//#define DISTINCT_E_FACTORS
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92

View File

@ -133,9 +133,6 @@
// :[1, 2, 3, 4, 5] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 2 #define EXTRUDERS 2
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -447,12 +444,16 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/**
* With this option each E stepper can have its own factors for the
* following movement settings. If fewer factors are given than the
* total number of extruders, the last value applies to the rest.
*/
//#define DISTINCT_E_FACTORS
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92

View File

@ -133,9 +133,6 @@
// :[1, 2, 3, 4, 5] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -470,12 +467,16 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/**
* With this option each E stepper can have its own factors for the
* following movement settings. If fewer factors are given than the
* total number of extruders, the last value applies to the rest.
*/
//#define DISTINCT_E_FACTORS
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92

View File

@ -136,9 +136,6 @@
// :[1, 2, 3, 4, 5] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -455,12 +452,16 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/**
* With this option each E stepper can have its own factors for the
* following movement settings. If fewer factors are given than the
* total number of extruders, the last value applies to the rest.
*/
//#define DISTINCT_E_FACTORS
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92

View File

@ -133,9 +133,6 @@
// :[1, 2, 3, 4, 5] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -458,12 +455,16 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/**
* With this option each E stepper can have its own factors for the
* following movement settings. If fewer factors are given than the
* total number of extruders, the last value applies to the rest.
*/
//#define DISTINCT_E_FACTORS
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92

View File

@ -153,9 +153,6 @@
// :[1, 2, 3, 4, 5] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -494,12 +491,16 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/**
* With this option each E stepper can have its own factors for the
* following movement settings. If fewer factors are given than the
* total number of extruders, the last value applies to the rest.
*/
//#define DISTINCT_E_FACTORS
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92

View File

@ -133,9 +133,6 @@
// :[1, 2, 3, 4, 5] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -464,12 +461,16 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/**
* With this option each E stepper can have its own factors for the
* following movement settings. If fewer factors are given than the
* total number of extruders, the last value applies to the rest.
*/
//#define DISTINCT_E_FACTORS
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92

View File

@ -133,9 +133,6 @@
// :[1, 2, 3, 4, 5] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 2 #define EXTRUDERS 2
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -464,12 +461,16 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/**
* With this option each E stepper can have its own factors for the
* following movement settings. If fewer factors are given than the
* total number of extruders, the last value applies to the rest.
*/
//#define DISTINCT_E_FACTORS
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92

View File

@ -133,9 +133,6 @@
// :[1, 2, 3, 4, 5] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -464,12 +461,16 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/**
* With this option each E stepper can have its own factors for the
* following movement settings. If fewer factors are given than the
* total number of extruders, the last value applies to the rest.
*/
//#define DISTINCT_E_FACTORS
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92

View File

@ -136,9 +136,6 @@
// :[1, 2, 3, 4, 5] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 // Single extruder. Set to 2 for dual extruders #define EXTRUDERS 1 // Single extruder. Set to 2 for dual extruders
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -461,12 +458,16 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/**
* With this option each E stepper can have its own factors for the
* following movement settings. If fewer factors are given than the
* total number of extruders, the last value applies to the rest.
*/
//#define DISTINCT_E_FACTORS
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92

View File

@ -165,9 +165,6 @@
// :[1, 2, 3, 4, 5] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -479,12 +476,16 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/**
* With this option each E stepper can have its own factors for the
* following movement settings. If fewer factors are given than the
* total number of extruders, the last value applies to the rest.
*/
//#define DISTINCT_E_FACTORS
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92

View File

@ -133,9 +133,6 @@
// :[1, 2, 3, 4, 5] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -484,12 +481,16 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/**
* With this option each E stepper can have its own factors for the
* following movement settings. If fewer factors are given than the
* total number of extruders, the last value applies to the rest.
*/
//#define DISTINCT_E_FACTORS
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92

View File

@ -155,9 +155,6 @@
// :[1, 2, 3, 4, 5] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -515,12 +512,16 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/**
* With this option each E stepper can have its own factors for the
* following movement settings. If fewer factors are given than the
* total number of extruders, the last value applies to the rest.
*/
//#define DISTINCT_E_FACTORS
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92

View File

@ -136,9 +136,6 @@
// :[1, 2, 3, 4, 5] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -455,12 +452,16 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/**
* With this option each E stepper can have its own factors for the
* following movement settings. If fewer factors are given than the
* total number of extruders, the last value applies to the rest.
*/
//#define DISTINCT_E_FACTORS
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92

View File

@ -133,9 +133,6 @@
// :[1, 2, 3, 4, 5] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -464,12 +461,16 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/**
* With this option each E stepper can have its own factors for the
* following movement settings. If fewer factors are given than the
* total number of extruders, the last value applies to the rest.
*/
//#define DISTINCT_E_FACTORS
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92

View File

@ -133,9 +133,6 @@
// :[1, 2, 3, 4, 5] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -538,12 +535,16 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/**
* With this option each E stepper can have its own factors for the
* following movement settings. If fewer factors are given than the
* total number of extruders, the last value applies to the rest.
*/
//#define DISTINCT_E_FACTORS
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92

View File

@ -133,9 +133,6 @@
// :[1, 2, 3, 4, 5] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -539,12 +536,16 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/**
* With this option each E stepper can have its own factors for the
* following movement settings. If fewer factors are given than the
* total number of extruders, the last value applies to the rest.
*/
//#define DISTINCT_E_FACTORS
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92

View File

@ -133,9 +133,6 @@
// :[1, 2, 3, 4, 5] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -528,12 +525,16 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/**
* With this option each E stepper can have its own factors for the
* following movement settings. If fewer factors are given than the
* total number of extruders, the last value applies to the rest.
*/
//#define DISTINCT_E_FACTORS
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92

View File

@ -133,9 +133,6 @@
// :[1, 2, 3, 4, 5] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -528,12 +525,16 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/**
* With this option each E stepper can have its own factors for the
* following movement settings. If fewer factors are given than the
* total number of extruders, the last value applies to the rest.
*/
//#define DISTINCT_E_FACTORS
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92

View File

@ -137,9 +137,6 @@
// :[1, 2, 3, 4, 5] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -522,12 +519,16 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/**
* With this option each E stepper can have its own factors for the
* following movement settings. If fewer factors are given than the
* total number of extruders, the last value applies to the rest.
*/
//#define DISTINCT_E_FACTORS
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92

View File

@ -133,9 +133,6 @@
// :[1, 2, 3, 4, 5] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -541,12 +538,16 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/**
* With this option each E stepper can have its own factors for the
* following movement settings. If fewer factors are given than the
* total number of extruders, the last value applies to the rest.
*/
//#define DISTINCT_E_FACTORS
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92

View File

@ -138,9 +138,6 @@
// :[1, 2, 3, 4, 5] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -478,12 +475,16 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/**
* With this option each E stepper can have its own factors for the
* following movement settings. If fewer factors are given than the
* total number of extruders, the last value applies to the rest.
*/
//#define DISTINCT_E_FACTORS
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92

View File

@ -133,9 +133,6 @@
// :[1, 2, 3, 4, 5] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -467,12 +464,16 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/**
* With this option each E stepper can have its own factors for the
* following movement settings. If fewer factors are given than the
* total number of extruders, the last value applies to the rest.
*/
//#define DISTINCT_E_FACTORS
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92

View File

@ -133,9 +133,6 @@
// :[1, 2, 3, 4, 5] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -454,12 +451,16 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/**
* With this option each E stepper can have its own factors for the
* following movement settings. If fewer factors are given than the
* total number of extruders, the last value applies to the rest.
*/
//#define DISTINCT_E_FACTORS
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92

View File

@ -133,9 +133,6 @@
// :[1, 2, 3, 4, 5] // :[1, 2, 3, 4, 5]
#define EXTRUDERS 1 #define EXTRUDERS 1
// Enable if your E steppers or extruder gear ratios are not identical
//#define DISTINCT_E_FACTORS
// For Cyclops or any "multi-extruder" that shares a single nozzle. // For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE //#define SINGLENOZZLE
@ -469,12 +466,16 @@
* *
* These settings can be reset by M502 * These settings can be reset by M502
* *
* You can set distinct factors for each E stepper, if needed.
* If fewer factors are given, the last will apply to the rest.
*
* Note that if EEPROM is enabled, saved values will override these. * Note that if EEPROM is enabled, saved values will override these.
*/ */
/**
* With this option each E stepper can have its own factors for the
* following movement settings. If fewer factors are given than the
* total number of extruders, the last value applies to the rest.
*/
//#define DISTINCT_E_FACTORS
/** /**
* Default Axis Steps Per Unit (steps/mm) * Default Axis Steps Per Unit (steps/mm)
* Override with M92 * Override with M92