Combine Travis tests to shorten required time

This commit is contained in:
Scott Lahteine 2017-06-11 22:49:35 -05:00
parent 0bc66bf22c
commit 570722a0fe

View File

@ -71,48 +71,15 @@ script:
#
- build_marlin
#
# Test heated bed temperature sensor
#
- opt_set TEMP_SENSOR_BED 1
- build_marlin
#
# Test 2 extruders on basic RAMPS 1.4
# Test 2 extruders (one MAX6675) and heated bed on basic RAMPS 1.4
# plus a "Fix Mounted" Probe with Safe Homing
#
- opt_set MOTHERBOARD BOARD_RAMPS_14_EEB
- opt_set EXTRUDERS 2
- opt_set TEMP_SENSOR_1 1
- build_marlin
#
# Test 5 extruders on AZTEEG_X3_PRO (can use any board with >=5 extruders defined)
# Include a test for LIN_ADVANCE here also
#
- opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO
- opt_set EXTRUDERS 5
- opt_set TEMP_SENSOR_1 1
- opt_set TEMP_SENSOR_2 5
- opt_set TEMP_SENSOR_3 20
- opt_set TEMP_SENSOR_4 999
- opt_set TEMP_SENSOR_BED 1
- opt_enable_adv LIN_ADVANCE
- build_marlin
#
# Test PIDTEMPBED
#
- restore_configs
- opt_set TEMP_SENSOR_BED 1
- opt_enable PIDTEMPBED
- build_marlin
#
# Test MAX6675
#
- restore_configs
- opt_set TEMP_SENSOR_0 -2
- build_marlin
#
# Test a "Fix Mounted" Probe along with Safe Homing
#
- restore_configs
- opt_enable FIX_MOUNTED_PROBE Z_SAFE_HOMING
- opt_set TEMP_SENSOR_1 1
- opt_set TEMP_SENSOR_BED 1
- opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING
- build_marlin
#
# ...with AUTO_BED_LEVELING_LINEAR, Z_MIN_PROBE_REPEATABILITY_TEST, and DEBUG_LEVELING_FEATURE
@ -151,17 +118,27 @@ script:
- opt_enable MESH_BED_LEVELING MESH_G28_REST_ORIGIN LCD_BED_LEVELING ULTIMAKERCONTROLLER
- build_marlin
#
# Test PROBE_MANUALLY feature, with LCD support
# Test PROBE_MANUALLY feature, with LCD support,
# EEPROM_SETTINGS, EEPROM_CHITCHAT, M100_FREE_MEMORY_WATCHER,
# INCH_MODE_SUPPORT, TEMPERATURE_UNITS_SUPPORT
#
- restore_configs
- opt_set MOTHERBOARD BOARD_MINIRAMBO
- opt_enable PROBE_MANUALLY AUTO_BED_LEVELING_BILINEAR LCD_BED_LEVELING ULTIMAKERCONTROLLER
- opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT
- build_marlin
#
# Test EEPROM_SETTINGS, EEPROM_CHITCHAT, M100_FREE_MEMORY_WATCHER,
# INCH_MODE_SUPPORT, TEMPERATURE_UNITS_SUPPORT
# Test 5 extruders on AZTEEG_X3_PRO (can use any board with >=5 extruders defined)
# Include a test for LIN_ADVANCE here also
#
- restore_configs
- opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT
- opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO
- opt_set EXTRUDERS 5
- opt_set TEMP_SENSOR_1 1
- opt_set TEMP_SENSOR_2 5
- opt_set TEMP_SENSOR_3 20
- opt_set TEMP_SENSOR_4 999
- opt_set TEMP_SENSOR_BED 1
- opt_enable_adv LIN_ADVANCE
- build_marlin
#
# Mixing Extruder with 5 steppers
@ -202,34 +179,19 @@ script:
- build_marlin
#
# Test MINIRAMBO for PWM_MOTOR_CURRENT
# ULTIMAKERCONTROLLER, FILAMENT_LCD_DISPLAY, FILAMENT_WIDTH_SENSOR,
# PRINTCOUNTER, NOZZLE_PARK_FEATURE, NOZZLE_CLEAN_FEATURE, PCA9632,
# Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS, BEZIER_CURVE_SUPPORT, EXPERIMENTAL_I2CBUS,
# FILAMENT_CHANGE_FEATURE, PARK_HEAD_ON_PAUSE, LCD_INFO_MENU,
#
- restore_configs
- opt_set MOTHERBOARD BOARD_MINIRAMBO
- build_marlin
#
# Test FILAMENT_CHANGE_FEATURE, PARK_HEAD_ON_PAUSE, and LCD_INFO_MENU
#
- restore_configs
- opt_enable ULTIMAKERCONTROLLER
- opt_enable_adv FILAMENT_CHANGE_FEATURE PARK_HEAD_ON_PAUSE LCD_INFO_MENU
- build_marlin
#
# Enable filament sensor
#
- restore_configs
- opt_enable FILAMENT_WIDTH_SENSOR
- build_marlin
#
# Enable filament sensor with LCD display
#
- opt_enable ULTIMAKERCONTROLLER FILAMENT_LCD_DISPLAY
- build_marlin
#
# Enable BEZIER_CURVE_SUPPORT, EXPERIMENTAL_I2CBUS, and I2C_SLAVE_ADDRESS
#
- restore_configs
- opt_enable_adv BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS
- opt_enable ULTIMAKERCONTROLLER FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR SDSUPPORT
- opt_enable PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PCA9632
- opt_enable_adv Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS
- opt_set_adv I2C_SLAVE_ADDRESS 63
- opt_enable_adv FILAMENT_CHANGE_FEATURE PARK_HEAD_ON_PAUSE LCD_INFO_MENU
- pins_set RAMPS X_MAX_PIN -1
- opt_set_adv Z2_MAX_PIN 2
- build_marlin
#
# Enable COREXY
@ -244,34 +206,8 @@ script:
- opt_enable COREYX
- build_marlin
#
# Enable Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS
#
- restore_configs
- opt_enable_adv Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS
- pins_set RAMPS X_MAX_PIN -1
- opt_set_adv Z2_MAX_PIN 2
- build_marlin
#
# Test PRINTCOUNTER
#
- restore_configs
- opt_enable PRINTCOUNTER
- build_marlin
#
# Test NOZZLE_PARK_FEATURE
#
- restore_configs
- opt_enable NOZZLE_PARK_FEATURE
- build_marlin
#
# Test NOZZLE_CLEAN_FEATURE
#
- restore_configs
- opt_enable NOZZLE_CLEAN_FEATURE
- build_marlin
#
#
######## STANDARD LCD/PANELS ##############
######## Other Standard LCD/Panels ##############
#
# ULTRA_LCD
#
@ -285,18 +221,6 @@ script:
- opt_enable DOGLCD
- build_marlin
#
# ULTIMAKERCONTROLLER
#
- restore_configs
- opt_enable ULTIMAKERCONTROLLER
- build_marlin
#
# PCA9632
#
- restore_configs
- opt_enable PCA9632
- build_marlin
#
# MAKRPANEL
# Needs to use Melzi and Sanguino hardware
#
@ -310,15 +234,11 @@ script:
- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT BABYSTEPPING
- build_marlin
#
# G3D_PANEL
# G3D_PANEL with SDCARD_SORT_ALPHA and STATUS_MESSAGE_SCROLLING
#
- restore_configs
- opt_enable G3D_PANEL SDSUPPORT
- build_marlin
#
# Add SDCARD_SORT_ALPHA, test G3D_PANEL again
#
- opt_enable_adv SDCARD_SORT_ALPHA
- opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING
- opt_set_adv SDSORT_GCODE true
- opt_set_adv SDSORT_USES_RAM true
- opt_set_adv SDSORT_USES_STACK true