Merge branch '70-taz6-pid-correction-for-universal-tool-heads' into 'master'
Resolve "TAZ6 PID correction for Universal Tool Heads" Closes #70 See merge request lulzbot3d/marlin!49
This commit is contained in:
Brian Kahl
commit
90259593eb
@ -401,7 +401,7 @@
|
|||||||
#define LULZBOT_M115_EXTRUDER_TYPE "H175"
|
#define LULZBOT_M115_EXTRUDER_TYPE "H175"
|
||||||
#elif defined(TOOLHEAD_M175)
|
#elif defined(TOOLHEAD_M175)
|
||||||
#undef LULZBOT_M115_EXTRUDER_TYPE
|
#undef LULZBOT_M115_EXTRUDER_TYPE
|
||||||
#define LULZBOT_M115_EXTRUDER_TYPE "M175"
|
#define LULZBOT_M115_EXTRUDER_TYPE "M175v2"
|
||||||
#elif defined(TOOLHEAD_SK175)
|
#elif defined(TOOLHEAD_SK175)
|
||||||
#undef LULZBOT_M115_EXTRUDER_TYPE
|
#undef LULZBOT_M115_EXTRUDER_TYPE
|
||||||
#define LULZBOT_M115_EXTRUDER_TYPE "SK175"
|
#define LULZBOT_M115_EXTRUDER_TYPE "SK175"
|
||||||
@ -843,44 +843,62 @@
|
|||||||
// Set/get with gcode: M301 E[extruder number, 0-2]
|
// Set/get with gcode: M301 E[extruder number, 0-2]
|
||||||
|
|
||||||
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
|
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
|
||||||
#if ENABLED(LULZBOT_UNIVERSAL_TOOLHEAD)
|
|
||||||
#if ANY(Sidekick_289, Sidekick_747)
|
//TAZ 6 Single Extruder (W)
|
||||||
// SK Tool heads (30W)
|
#define TAZ6_STD_DEFAULT_Kp 28.79 //used to define stock PID. NOTE: if values are changed, both sets need to be changed.
|
||||||
#define LULZBOT_DEFAULT_Kp 26.47
|
#define TAZ6_STD_DEFAULT_Ki 1.91 //NOTE: if values are changed, both sets need to be changed.
|
||||||
#define LULZBOT_DEFAULT_Ki 2.32
|
#define TAZ6_STD_DEFAULT_Kd 108.51
|
||||||
#define LULZBOT_DEFAULT_Kd 75.56
|
#define charTAZ6_STD_DEFAULT_Kp "28.79" //used in the tool head menu gcode.
|
||||||
#else
|
#define charTAZ6_STD_DEFAULT_Ki "1.91"
|
||||||
// E3D Titan Aero with LulzBot V6 block
|
#define charTAZ6_STD_DEFAULT_Kd "108.51"
|
||||||
#define LULZBOT_DEFAULT_Kp 21.0
|
|
||||||
#define LULZBOT_DEFAULT_Ki 1.78
|
// E3D Titan Aero with LulzBot V6 block (40W)
|
||||||
#define LULZBOT_DEFAULT_Kd 61.93
|
#define SLSEHE_DEFAULT_Kp 21.0 //NOTE: if values are changed, both sets need to be changed.
|
||||||
#endif
|
#define SLSEHE_DEFAULT_Ki 1.78
|
||||||
#endif
|
#define SLSEHE_DEFAULT_Kd 61.93
|
||||||
#if ANY(TOOLHEAD_SL_SE_HE, LULZBOT_E3D_Titan_Aero_V6) // Used when LCD is not installed
|
#define charSLSEHE_DEFAULT_Kp "21.0"
|
||||||
#define LULZBOT_DEFAULT_Kp 21.0
|
#define charSLSEHE_DEFAULT_Ki "1.78"
|
||||||
#define LULZBOT_DEFAULT_Ki 1.78
|
#define charSLSEHE_DEFAULT_Kd "61.93"
|
||||||
#define LULZBOT_DEFAULT_Kd 61.93
|
|
||||||
#elif ENABLED(TOOLHEAD_SK175)
|
// SK175 Tool head (30W)
|
||||||
#define LULZBOT_DEFAULT_Kp 26.47
|
#define SK175_DEFAULT_Kp 26.47 //NOTE: if values are changed, both sets need to be changed.
|
||||||
#define LULZBOT_DEFAULT_Ki 2.32
|
#define SK175_DEFAULT_Ki 2.32
|
||||||
#define LULZBOT_DEFAULT_Kd 75.56
|
#define SK175_DEFAULT_Kd 75.56
|
||||||
#elif ENABLED(TOOLHEAD_SK285)
|
#define charSK175_DEFAULT_Kp "26.47"
|
||||||
#define LULZBOT_DEFAULT_Kp 26.47
|
#define charSK175_DEFAULT_Ki "2.32"
|
||||||
#define LULZBOT_DEFAULT_Ki 2.32
|
#define charSK175_DEFAULT_Kd "75.56"
|
||||||
#define LULZBOT_DEFAULT_Kd 75.56
|
|
||||||
#elif ENABLED(TOOLHEAD_H175)
|
// SK285 Tool head (30W)
|
||||||
#define LULZBOT_DEFAULT_Kp 27.58
|
#define SK285_DEFAULT_Kp 26.90 //NOTE: if values are changed, both sets need to be changed.
|
||||||
#define LULZBOT_DEFAULT_Ki 3.22
|
#define SK285_DEFAULT_Ki 2.41
|
||||||
#define LULZBOT_DEFAULT_Kd 65.66
|
#define SK285_DEFAULT_Kd 75.19
|
||||||
#elif ENABLED(TOOLHEAD_M175)
|
#define charSK285_DEFAULT_Kp "26.90"
|
||||||
#define LULZBOT_DEFAULT_Kp 24.54
|
#define charSK285_DEFAULT_Ki "2.41"
|
||||||
#define LULZBOT_DEFAULT_Ki 2.52
|
#define charSK285_DEFAULT_Kd "75.19"
|
||||||
#define LULZBOT_DEFAULT_Kd 61.75
|
|
||||||
#elif ANY(TOOLHEAD_HS_HSPLUS)
|
// H175 Tool head (40W)
|
||||||
#define LULZBOT_DEFAULT_Kp 37.55
|
#define H175_DEFAULT_Kp 27.58 //NOTE: if values are changed, both sets need to be changed.
|
||||||
#define LULZBOT_DEFAULT_Ki 5.39
|
#define H175_DEFAULT_Ki 3.22
|
||||||
#define LULZBOT_DEFAULT_Kd 65.36
|
#define H175_DEFAULT_Kd 65.66
|
||||||
#endif
|
#define charH175_DEFAULT_Kp "27.58"
|
||||||
|
#define charH175_DEFAULT_Ki "3.22"
|
||||||
|
#define charH175_DEFAULT_Kd "65.66"
|
||||||
|
|
||||||
|
// M175 Tool head (50W)
|
||||||
|
#define M175_DEFAULT_Kp 22.12 //NOTE: if values are changed, both sets need to be changed.
|
||||||
|
#define M175_DEFAULT_Ki 1.94
|
||||||
|
#define M175_DEFAULT_Kd 63.59
|
||||||
|
#define charM175_DEFAULT_Kp "22.12"
|
||||||
|
#define charM175_DEFAULT_Ki "1.94"
|
||||||
|
#define charM175_DEFAULT_Kd "63.59"
|
||||||
|
|
||||||
|
// HS & HSPLUS Tool heads
|
||||||
|
#define HSHSPLUS_DEFAULT_Kp 37.55 //NOTE: if values are changed, both sets need to be changed.
|
||||||
|
#define HSHSPLUS_DEFAULT_Ki 5.39
|
||||||
|
#define HSHSPLUS_DEFAULT_Kd 65.36
|
||||||
|
#define charHSHSPLUS_DEFAULT_Kp "37.55"
|
||||||
|
#define charHSHSPLUS_DEFAULT_Ki "5.39"
|
||||||
|
#define charHSHSPLUS_DEFAULT_Kd "65.36"
|
||||||
|
|
||||||
#if ENABLED(PID_PARAMS_PER_HOTEND)
|
#if ENABLED(PID_PARAMS_PER_HOTEND)
|
||||||
// Specify between 1 and HOTENDS values per array.
|
// Specify between 1 and HOTENDS values per array.
|
||||||
@ -888,10 +906,44 @@
|
|||||||
#define DEFAULT_Kp_LIST { 22.20, 22.20 }
|
#define DEFAULT_Kp_LIST { 22.20, 22.20 }
|
||||||
#define DEFAULT_Ki_LIST { 1.08, 1.08 }
|
#define DEFAULT_Ki_LIST { 1.08, 1.08 }
|
||||||
#define DEFAULT_Kd_LIST { 114.00, 114.00 }
|
#define DEFAULT_Kd_LIST { 114.00, 114.00 }
|
||||||
|
|
||||||
#else
|
#else
|
||||||
#define DEFAULT_Kp LULZBOT_DEFAULT_Kp
|
// Sets default PID based on which printer/toolhead is selected
|
||||||
#define DEFAULT_Ki LULZBOT_DEFAULT_Ki
|
#if ENABLED(TAZ6) // Taz 6 Standard toolhead
|
||||||
#define DEFAULT_Kd LULZBOT_DEFAULT_Kd
|
#define DEFAULT_Kp TAZ6_STD_DEFAULT_Kp
|
||||||
|
#define DEFAULT_Ki TAZ6_STD_DEFAULT_Ki
|
||||||
|
#define DEFAULT_Kd TAZ6_STD_DEFAULT_Kd
|
||||||
|
|
||||||
|
#elif ANY(TOOLHEAD_SL_SE_HE, LULZBOT_E3D_Titan_Aero_V6, LULZBOT_UNIVERSAL_TOOLHEAD)
|
||||||
|
#define DEFAULT_Kp SLSEHE_DEFAULT_Kp
|
||||||
|
#define DEFAULT_Ki SLSEHE_DEFAULT_Ki
|
||||||
|
#define DEFAULT_Kd SLSEHE_DEFAULT_Kd
|
||||||
|
|
||||||
|
#elif ENABLED(TOOLHEAD_SK175)
|
||||||
|
#define DEFAULT_Kp SK175_DEFAULT_Kp
|
||||||
|
#define DEFAULT_Ki SK175_DEFAULT_Ki
|
||||||
|
#define DEFAULT_Kd SK175_DEFAULT_Kd
|
||||||
|
|
||||||
|
#elif ENABLED(TOOLHEAD_SK285)
|
||||||
|
#define DEFAULT_Kp SK285_DEFAULT_Kp
|
||||||
|
#define DEFAULT_Ki SK285_DEFAULT_Ki
|
||||||
|
#define DEFAULT_Kd SK285_DEFAULT_Kd
|
||||||
|
|
||||||
|
#elif ENABLED(TOOLHEAD_H175)
|
||||||
|
#define DEFAULT_Kp H175_DEFAULT_Kp
|
||||||
|
#define DEFAULT_Ki H175_DEFAULT_Ki
|
||||||
|
#define DEFAULT_Kd H175_DEFAULT_Kd
|
||||||
|
|
||||||
|
#elif ENABLED(TOOLHEAD_M175)
|
||||||
|
#define DEFAULT_Kp M175_DEFAULT_Kp
|
||||||
|
#define DEFAULT_Ki M175_DEFAULT_Ki
|
||||||
|
#define DEFAULT_Kd M175_DEFAULT_Kd
|
||||||
|
|
||||||
|
#elif ANY(TOOLHEAD_HS_HSPLUS)
|
||||||
|
#define DEFAULT_Kp HSHSPLUS_DEFAULT_Kp
|
||||||
|
#define DEFAULT_Ki HSHSPLUS_DEFAULT_Ki
|
||||||
|
#define DEFAULT_Kd HSHSPLUS_DEFAULT_Kd
|
||||||
|
#endif
|
||||||
#endif
|
#endif
|
||||||
#endif // PIDTEMP
|
#endif // PIDTEMP
|
||||||
|
|
||||||
|
|||||||
@ -3822,11 +3822,9 @@
|
|||||||
#define CUSTOM_MENU_MAIN_SCRIPT_RETURN // Return to status screen after a script
|
#define CUSTOM_MENU_MAIN_SCRIPT_RETURN // Return to status screen after a script
|
||||||
#define CUSTOM_MENU_MAIN_ONLY_IDLE // Only show custom menu when the machine is idle
|
#define CUSTOM_MENU_MAIN_ONLY_IDLE // Only show custom menu when the machine is idle
|
||||||
|
|
||||||
#if ANY(TAZ6)
|
#define SK_DEFAULT_PID "26.90I2.41D75.19"
|
||||||
#define DEFAULT_PID "P28.79I1.91D108.51"
|
#define TAZ6_DEFAULT_PID "P28.79I1.91D108.51"
|
||||||
#else
|
#define DEFAULT_PID "P21.0I1.78D61.93"
|
||||||
#define DEFAULT_PID "P21.0I1.78D61.93"
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if ANY(TAZ6, Workhorse) //conversion to digipot units = ((mA-750)/5+135)
|
#if ANY(TAZ6, Workhorse) //conversion to digipot units = ((mA-750)/5+135)
|
||||||
#define E_CURRENT_Aero "160" //((875-750)/5+135) = 160
|
#define E_CURRENT_Aero "160" //((875-750)/5+135) = 160
|
||||||
@ -3839,58 +3837,58 @@
|
|||||||
|
|
||||||
#if ANY(Sidekick_289, Sidekick_747)
|
#if ANY(Sidekick_289, Sidekick_747)
|
||||||
#define MAIN_MENU_ITEM_1_DESC "SK175|0.50mm|BRASS"
|
#define MAIN_MENU_ITEM_1_DESC "SK175|0.50mm|BRASS"
|
||||||
#define MAIN_MENU_ITEM_1_GCODE "M92E420\nM301P26.29I2.57D72.59\nM906E" E_CURRENT_Aero "\nM500\nM117 SK175|0.50mm|BRASS"
|
#define MAIN_MENU_ITEM_1_GCODE "M92E420\nM301P" charSK175_DEFAULT_Kp "I" charSK175_DEFAULT_Ki "D" charSK175_DEFAULT_Kd"\nM906E" E_CURRENT_Aero "\nM500\nM117 SK175|0.50mm|BRASS"
|
||||||
|
|
||||||
#define MAIN_MENU_ITEM_2_DESC "SK285|0.50mm|BRASS"
|
#define MAIN_MENU_ITEM_2_DESC "SK285|0.50mm|BRASS"
|
||||||
#define MAIN_MENU_ITEM_2_GCODE "M92E420\nM301P26.90I2.41D75.19\nM906E" E_CURRENT_Aero "\nM500\nM117 SK285|0.50mm|BRASS"
|
#define MAIN_MENU_ITEM_2_GCODE "M92E420\nM301P" charSK285_DEFAULT_Kp "I" charSK285_DEFAULT_Ki "D" charSK285_DEFAULT_Kd "\nM906E" E_CURRENT_Aero "\nM500\nM117 SK285|0.50mm|BRASS"
|
||||||
#endif
|
#endif
|
||||||
#if DISABLED(TAZ6, Workhorse)
|
#if DISABLED(TAZ6, Workhorse)
|
||||||
#define MAIN_MENU_ITEM_3_DESC "M175v2|0.50mm|CRB CU"
|
#define MAIN_MENU_ITEM_3_DESC "M175v2|0.50mm|CRB CU"
|
||||||
#define MAIN_MENU_ITEM_3_GCODE "M92E415\nM301P24.54I2.52D61.75\nM906E" E_CURRENT_BMG "\nM500\nM117 M175v2|0.50mm|CRB CU"
|
#define MAIN_MENU_ITEM_3_GCODE "M92E415\nM301P" charM175_DEFAULT_Kp "I" charM175_DEFAULT_Ki "D" charM175_DEFAULT_Kd "\nM906E" E_CURRENT_BMG "\nM500\nM117 M175v2|0.50mm|CRB CU"
|
||||||
|
|
||||||
#define MAIN_MENU_ITEM_4_DESC "SL|0.25mm|NKL-PL CU"
|
#define MAIN_MENU_ITEM_4_DESC "SL|0.25mm|NKL-PL CU"
|
||||||
#define MAIN_MENU_ITEM_4_GCODE "M92E420\nM301" DEFAULT_PID "\nM906E" E_CURRENT_Aero "\nM500\nM117 SL|0.25mm|NKL-PL CU"
|
#define MAIN_MENU_ITEM_4_GCODE "M92E420\nM301P" charSLSEHE_DEFAULT_Kp "I" charSLSEHE_DEFAULT_Ki "D" charSLSEHE_DEFAULT_Kd "\nM906E" E_CURRENT_Aero "\nM500\nM117 SL|0.25mm|NKL-PL CU"
|
||||||
|
|
||||||
#define MAIN_MENU_ITEM_5_DESC "SE|0.50mm|NKL-PL CU"
|
#define MAIN_MENU_ITEM_5_DESC "SE|0.50mm|NKL-PL CU"
|
||||||
#define MAIN_MENU_ITEM_5_GCODE "M92E420\nM301" DEFAULT_PID "\nM906E" E_CURRENT_Aero "\nM500\nM117 SE|0.50mm|NKL-PL CU"
|
#define MAIN_MENU_ITEM_5_GCODE "M92E420\nM301P" charSLSEHE_DEFAULT_Kp "I" charSLSEHE_DEFAULT_Ki "D" charSLSEHE_DEFAULT_Kd "\nM906E" E_CURRENT_Aero "\nM500\nM117 SE|0.50mm|NKL-PL CU"
|
||||||
|
|
||||||
#define MAIN_MENU_ITEM_6_DESC "HE|0.50mm|HRD STEEL"
|
#define MAIN_MENU_ITEM_6_DESC "HE|0.50mm|HRD STEEL"
|
||||||
#define MAIN_MENU_ITEM_6_GCODE "M92E420\nM301" DEFAULT_PID "\nM906E" E_CURRENT_Aero "\nM500\nM117 HE|0.50mm|HRD STEEL"
|
#define MAIN_MENU_ITEM_6_GCODE "M92E420\nM301P" charSLSEHE_DEFAULT_Kp "I" charSLSEHE_DEFAULT_Ki "D" charSLSEHE_DEFAULT_Kd "\nM906E" E_CURRENT_Aero "\nM500\nM117 HE|0.50mm|HRD STEEL"
|
||||||
|
|
||||||
#define MAIN_MENU_ITEM_7_DESC "HS|0.80mm|HRD STEEL"
|
#define MAIN_MENU_ITEM_7_DESC "HS|0.80mm|HRD STEEL"
|
||||||
#define MAIN_MENU_ITEM_7_GCODE "M92E420\nM301" DEFAULT_PID "\nM906E" E_CURRENT_Aero "\nM500\nM117 HS|0.80mm|HRD STEEL"
|
#define MAIN_MENU_ITEM_7_GCODE "M92E420\nM301P" charHSHSPLUS_DEFAULT_Kp "I" charHSHSPLUS_DEFAULT_Ki "D" charHSHSPLUS_DEFAULT_Kd "\nM906E" E_CURRENT_Aero "\nM500\nM117 HS|0.80mm|HRD STEEL"
|
||||||
|
|
||||||
#define MAIN_MENU_ITEM_8_DESC "HS+|1.20mm|HRD STEEL"
|
#define MAIN_MENU_ITEM_8_DESC "HS+|1.20mm|HRD STEEL"
|
||||||
#define MAIN_MENU_ITEM_8_GCODE "M92E420\nM301" DEFAULT_PID "\nM906E" E_CURRENT_Aero "\nM500\nM117 HS+|1.20mm|HRD STEEL"
|
#define MAIN_MENU_ITEM_8_GCODE "M92E420\nM301P" charHSHSPLUS_DEFAULT_Kp "I" charHSHSPLUS_DEFAULT_Ki "D" charHSHSPLUS_DEFAULT_Kd "\nM906E" E_CURRENT_Aero "\nM500\nM117 HS+|1.20mm|HRD STEEL"
|
||||||
|
|
||||||
#define MAIN_MENU_ITEM_9_DESC "H175|0.50mm|NKL-PL CU"
|
#define MAIN_MENU_ITEM_9_DESC "H175|0.50mm|NKL-PL CU"
|
||||||
#define MAIN_MENU_ITEM_9_GCODE "M92E409\nM301" DEFAULT_PID "\nM906E" E_CURRENT_Aero "\nM500\nM117 H175|0.50mm|NKL-PL CU"
|
#define MAIN_MENU_ITEM_9_GCODE "M92E409\nM301P" charH175_DEFAULT_Kp "I" charH175_DEFAULT_Ki "D" charH175_DEFAULT_Kd "\nM906E" E_CURRENT_Aero "\nM500\nM117 H175|0.50mm|NKL-PL CU"
|
||||||
#else
|
#else
|
||||||
#define MAIN_MENU_ITEM_3_DESC "M175v2|0.50mm|CRB CU"
|
#define MAIN_MENU_ITEM_3_DESC "M175v2|0.50mm|CRB CU"
|
||||||
#define MAIN_MENU_ITEM_3_GCODE "M92E415\nM206Y0\nM301P24.54I2.52D61.75\nM907E" E_CURRENT_BMG "\nM500\nM117 M175v2|0.50mm|CRB CU"
|
#define MAIN_MENU_ITEM_3_GCODE "M92E415\nM206Y0\nM301P" charM175_DEFAULT_Kp "I" charM175_DEFAULT_Ki "D" charM175_DEFAULT_Kd "\nM907E" E_CURRENT_BMG "\nM500\nM117 M175v2|0.50mm|CRB CU"
|
||||||
|
|
||||||
#define MAIN_MENU_ITEM_4_DESC "SL|0.25mm|NKL-PL CU"
|
#define MAIN_MENU_ITEM_4_DESC "SL|0.25mm|NKL-PL CU"
|
||||||
#define MAIN_MENU_ITEM_4_GCODE "M92E420\nM206Y0\nM301" DEFAULT_PID "\nM907E" E_CURRENT_Aero "\nM500\nM117 SL|0.25mm|NKL-PL CU"
|
#define MAIN_MENU_ITEM_4_GCODE "M92E420\nM206Y0\nM301P" charSLSEHE_DEFAULT_Kp "I" charSLSEHE_DEFAULT_Ki "D" charSLSEHE_DEFAULT_Kd "\nM907E" E_CURRENT_Aero "\nM500\nM117 SL|0.25mm|NKL-PL CU"
|
||||||
|
|
||||||
#define MAIN_MENU_ITEM_5_DESC "SE|0.50mm|NKL-PL CU"
|
#define MAIN_MENU_ITEM_5_DESC "SE|0.50mm|NKL-PL CU"
|
||||||
#define MAIN_MENU_ITEM_5_GCODE "M92E420\nM206Y0\nM301" DEFAULT_PID "\nM907E" E_CURRENT_Aero "\nM500\nM117 SE|0.50mm|NKL-PL CU"
|
#define MAIN_MENU_ITEM_5_GCODE "M92E420\nM206Y0\nM301P" charSLSEHE_DEFAULT_Kp "I" charSLSEHE_DEFAULT_Ki "D" charSLSEHE_DEFAULT_Kd "\nM907E" E_CURRENT_Aero "\nM500\nM117 SE|0.50mm|NKL-PL CU"
|
||||||
|
|
||||||
#define MAIN_MENU_ITEM_6_DESC "HE|0.50mm|HRD STEEL"
|
#define MAIN_MENU_ITEM_6_DESC "HE|0.50mm|HRD STEEL"
|
||||||
#define MAIN_MENU_ITEM_6_GCODE "M92E420\nM206Y0\nM301" DEFAULT_PID "\nM907E" E_CURRENT_Aero "\nM500\nM117 HE|0.50mm|HRD STEEL"
|
#define MAIN_MENU_ITEM_6_GCODE "M92E420\nM206Y0\nM301P" charSLSEHE_DEFAULT_Kp "I" charSLSEHE_DEFAULT_Ki "D" charSLSEHE_DEFAULT_Kd "\nM907E" E_CURRENT_Aero "\nM500\nM117 HE|0.50mm|HRD STEEL"
|
||||||
|
|
||||||
#define MAIN_MENU_ITEM_7_DESC "HS|0.80mm|HRD STEEL"
|
#define MAIN_MENU_ITEM_7_DESC "HS|0.80mm|HRD STEEL"
|
||||||
#define MAIN_MENU_ITEM_7_GCODE "M92E420\nM206Y0\nM301" DEFAULT_PID "\nM907E" E_CURRENT_Aero "\nM500\nM117 HS|0.80mm|HRD STEEL"
|
#define MAIN_MENU_ITEM_7_GCODE "M92E420\nM206Y0\nM301P" charHSHSPLUS_DEFAULT_Kp "I" charHSHSPLUS_DEFAULT_Ki "D" charHSHSPLUS_DEFAULT_Kd "\nM907E" E_CURRENT_Aero "\nM500\nM117 HS|0.80mm|HRD STEEL"
|
||||||
|
|
||||||
#define MAIN_MENU_ITEM_8_DESC "HS+|1.20mm|HRD STEEL"
|
#define MAIN_MENU_ITEM_8_DESC "HS+|1.20mm|HRD STEEL"
|
||||||
#define MAIN_MENU_ITEM_8_GCODE "M92E420\nM206Y0\nM301" DEFAULT_PID "\nM907E" E_CURRENT_Aero "\nM500\nM117 HS+|1.20mm|HRD STEEL"
|
#define MAIN_MENU_ITEM_8_GCODE "M92E420\nM206Y0\nM301P" charHSHSPLUS_DEFAULT_Kp "I" charHSHSPLUS_DEFAULT_Ki "D" charHSHSPLUS_DEFAULT_Kd "\nM907E" E_CURRENT_Aero "\nM500\nM117 HS+|1.20mm|HRD STEEL"
|
||||||
|
|
||||||
#define MAIN_MENU_ITEM_9_DESC "H175|0.50mm|NKL-PL CU"
|
#define MAIN_MENU_ITEM_9_DESC "H175|0.50mm|NKL-PL CU"
|
||||||
#define MAIN_MENU_ITEM_9_GCODE "M92E409\nM206Y0\nM301" DEFAULT_PID "\nM906E" E_CURRENT_Aero "\nM500\nM117 H175|0.50mm|NKL-PL CU"
|
#define MAIN_MENU_ITEM_9_GCODE "M92E409\nM206Y0\nM301P" charH175_DEFAULT_Kp "I" charH175_DEFAULT_Ki "D" charH175_DEFAULT_Kd "\nM906E" E_CURRENT_Aero "\nM500\nM117 H175|0.50mm|NKL-PL CU"
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if defined(TAZ6)
|
#if defined(TAZ6)
|
||||||
#define MAIN_MENU_ITEM_1_DESC "Standard|0.5mm"
|
#define MAIN_MENU_ITEM_1_DESC "Standard|0.5mm"
|
||||||
#define MAIN_MENU_ITEM_1_GCODE "M92E833\nM206Y4\nM301" DEFAULT_PID "\nM907E" E_CURRENT_Std "\nM500\nM117 Standard|0.5mm"
|
#define MAIN_MENU_ITEM_1_GCODE "M92E833\nM206Y4\nM301P" charTAZ6_STD_DEFAULT_Kp "I" charTAZ6_STD_DEFAULT_Ki "D" charTAZ6_STD_DEFAULT_Kd "\nM907E" E_CURRENT_Std "\nM500\nM117 Standard|0.5mm"
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user