CMS/Marlin
3
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Trigorilla Pro board (#18692)

Browse Source
This commit is contained in:
Claus Näveke 2020-07-19 00:40:10 +02:00 committed by GitHub
parent 6f0885a3a3
commit afce012960
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
4 changed files with 168 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
Marlin/src/core/boards.h
View File

@ -311,6 +311,7 @@
#define BOARD_CHITU3D_V5 4030 // Chitu3D TronXY X5SA V5 Board
#define BOARD_CHITU3D_V6 4031 // Chitu3D TronXY X5SA V5 Board
#define BOARD_CREALITY_V4 4032 // Creality v4.x (STM32F103RE)
#define BOARD_TRIGORILLA_PRO 4033 // Trigorilla Pro (STM32F103ZET6)
//
// ARM Cortex-M4F

2
Marlin/src/pins/pins.h
View File

@ -546,6 +546,8 @@
#include "stm32f1/pins_CHITU3D_V6.h" // STM32F1 env:chitu_f103 env:chitu_f103_lvgl
#elif MB(CREALITY_V4)
#include "stm32f1/pins_CREALITY_V4.h" // STM32F1 env:STM32F103RET6_creality
#elif MB(TRIGORILLA_PRO)
#include "stm32f1/pins_TRIGORILLA_PRO.h" // STM32F1 env:trigorilla_pro
//
// ARM Cortex-M4F

157
Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h Normal file
View File

@ -0,0 +1,157 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* ANYCUBIC Trigorilla Pro (STM32F130ZET6) board pin assignments.
* It is the same used by the Tronxy X5SA thanks to ftoz1 for sharing it
* https://github.com/MarlinFirmware/Marlin/issues/14655
* https://github.com/MarlinFirmware/Marlin/files/3401484/x5sa-main_board-2.pdf
*/
#ifndef __STM32F1__
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
#elif HOTENDS > 2 || E_STEPPERS > 2
#error "Trigorilla Pro supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_INFO_NAME "Trigorilla Pro"
#define DISABLE_JTAG
//
// EEPROM
//
#define FLASH_EEPROM_EMULATION
#if ENABLED(FLASH_EEPROM_EMULATION)
// SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h)
#define EEPROM_START_ADDRESS (0x8000000UL + (512 * 1024) - 2 * EEPROM_PAGE_SIZE)
#define EEPROM_PAGE_SIZE (0x800U) // 2KB, but will use 2x more (4KB)
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE
#else
#define MARLIN_EEPROM_SIZE (0x800U) // On SD, Limit to 2KB, require this amount of RAM
#endif
//
// Limit Switches
//
#define X_MAX_PIN PG10
#define Y_MAX_PIN PA12
#define Z_MAX_PIN PA14
#define Z_MIN_PIN PA13
//
// Steppers
//
#define X_ENABLE_PIN PC13
#define X_STEP_PIN PE5
#define X_DIR_PIN PE6
#define Y_ENABLE_PIN PE4
#define Y_STEP_PIN PE2
#define Y_DIR_PIN PE3
#define Z_ENABLE_PIN PE1
#define Z_STEP_PIN PB9
#define Z_DIR_PIN PE0
#define E0_ENABLE_PIN PB8
#define E0_STEP_PIN PB4
#define E0_DIR_PIN PB5
#define E1_ENABLE_PIN PG8
#define E1_STEP_PIN PC7
#define E1_DIR_PIN PC6
//
// Temperature Sensors
//
#define TEMP_0_PIN PA1 // TH1
#define TEMP_BED_PIN PA0 // TB1
//
// Heaters
//
#define HEATER_0_PIN PG12 // HEATER1
#define HEATER_BED_PIN PG11 // HOT BED
#define HEATER_BED_INVERTING true
//
// Fans
//
#define CONTROLLER_FAN_PIN PD6 // FAN
#define FAN_PIN PG13 // FAN
#define FAN1_PIN PG14 // FAN
//
// Misc
//
#define BEEPER_PIN PB0
#define LED_PIN PD3
//#define POWER_LOSS_PIN PG2 // PG4 PW_DET
#define FIL_RUNOUT_PIN PA15 // MT_DET
/**
* Note: MKS Robin TFT screens use various TFT controllers
* Supported screens are based on the ILI9341, ST7789V and ILI9328 (320x240)
* ILI9488 is not supported.
* Define init sequences for other screens in u8g_dev_tft_320x240_upscale_from_128x64.cpp
*
* If the screen stays white, disable 'LCD_RESET_PIN' to let the bootloader init the screen.
*
* Setting an 'LCD_RESET_PIN' may cause a flicker when entering the LCD menu
* because Marlin uses the reset as a failsafe to revive a glitchy LCD.
*/
#define LCD_RESET_PIN PF11
#define LCD_BACKLIGHT_PIN PD13
#define FSMC_CS_PIN PD7 // NE4
#define FSMC_RS_PIN PD11 // A0
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
#define FSMC_DMA_DEV DMA2
#define FSMC_DMA_CHANNEL DMA_CH5
#if ENABLED(TOUCH_BUTTONS)
#define TOUCH_CS_PIN PB7 // SPI2_NSS
#define TOUCH_SCK_PIN PA5 // SPI2_SCK
#define TOUCH_MISO_PIN PA6 // SPI2_MISO
#define TOUCH_MOSI_PIN PA7 // SPI2_MOSI
#endif
// SPI1(PA7) & SPI3(PB5) not available
#define ENABLE_SPI2
#if ENABLED(SDIO_SUPPORT)
#define SCK_PIN PB13 // SPI2 ok
#define MISO_PIN PB14 // SPI2 ok
#define MOSI_PIN PB15 // SPI2 ok
#define SS_PIN PC11 // PB12 is X- ok
#define SD_DETECT_PIN -1 // SD_CD ok
#else
// SD as custom software SPI (SDIO pins)
#define SCK_PIN PC12
#define MISO_PIN PC8
#define MOSI_PIN PD2
#define SS_PIN -1
#define ONBOARD_SD_CS_PIN PC11
#define SDSS PD2
#define SD_DETECT_PIN -1
#endif

8
platformio.ini
View File

@ -586,6 +586,14 @@ platform = ${common_stm32f1.platform}
extends = env:mks_robin
extra_scripts = buildroot/share/PlatformIO/scripts/mks_robin_pro.py
#
# TRIGORILLA PRO (STM32F103ZET6)
#
[env:trigorilla_pro]
platform = ${common_stm32f1.platform}
extends = env:mks_robin
#
# MKS Robin E3D (STM32F103RCT6) and
# MKS Robin E3 with TMC2209