CMS/Marlin
3
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

TMC Square Wave Stepping mode (#14195)

Browse Source
This commit is contained in:
teemuatlut 2019-06-09 13:08:05 +03:00 committed by Scott Lahteine
parent 80ce0d2bdb
commit cccc51ee0e
79 changed files with 549 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
Marlin/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

18
Marlin/src/module/stepper_indirection.cpp
View File

@ -234,6 +234,9 @@
chopconf.intpol = INTERPOLATE;
chopconf.hend = chopper_timing.hend + 3;
chopconf.hstrt = chopper_timing.hstrt - 1;
#if ENABLED(SQUARE_WAVE_STEPPING)
chopconf.dedge = true;
#endif
st.CHOPCONF(chopconf.sr);
st.rms_current(mA, HOLD_MULTIPLIER);
@ -274,6 +277,9 @@
chopconf.intpol = INTERPOLATE;
chopconf.hend = timings[1] + 3;
chopconf.hstrt = timings[2] - 1;
#if ENABLED(SQUARE_WAVE_STEPPING)
chopconf.dedge = true;
#endif
st.CHOPCONF(chopconf.sr);
st.rms_current(mA, HOLD_MULTIPLIER);
@ -515,6 +521,9 @@
chopconf.intpol = INTERPOLATE;
chopconf.hend = chopper_timing.hend + 3;
chopconf.hstrt = chopper_timing.hstrt - 1;
#if ENABLED(SQUARE_WAVE_STEPPING)
chopconf.dedge = true;
#endif
st.CHOPCONF(chopconf.sr);
st.rms_current(mA, HOLD_MULTIPLIER);
@ -553,6 +562,9 @@
chopconf.toff = chopper_timing.toff;
chopconf.hend = chopper_timing.hend + 3;
chopconf.hstrt = chopper_timing.hstrt - 1;
#if ENABLED(SQUARE_WAVE_STEPPING)
chopconf.dedge = true;
#endif
st.CHOPCONF(chopconf.sr);
st.rms_current(mA);
@ -577,6 +589,9 @@
chopconf.intpol = INTERPOLATE;
chopconf.hend = chopper_timing.hend + 3;
chopconf.hstrt = chopper_timing.hstrt - 1;
#if ENABLED(SQUARE_WAVE_STEPPING)
chopconf.dedge = true;
#endif
st.CHOPCONF(chopconf.sr);
st.rms_current(mA, HOLD_MULTIPLIER);
@ -617,6 +632,9 @@
chopconf.intpol = INTERPOLATE;
chopconf.hend = timings[1] + 3;
chopconf.hstrt = timings[2] - 1;
#if ENABLED(SQUARE_WAVE_STEPPING)
chopconf.dedge = true;
#endif
st.CHOPCONF(chopconf.sr);
st.rms_current(mA, HOLD_MULTIPLIER);

82
Marlin/src/module/stepper_indirection.h
View File

@ -127,7 +127,11 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define X_DIR_READ READ(X_DIR_PIN)
#endif
#define X_STEP_INIT SET_OUTPUT(X_STEP_PIN)
#define X_STEP_WRITE(STATE) WRITE(X_STEP_PIN,STATE)
#if AXIS_IS_TMC(X) && ENABLED(SQUARE_WAVE_STEPPING)
#define X_STEP_WRITE(STATE) do { if(STATE) TOGGLE(X_STEP_PIN); } while(0)
#else
#define X_STEP_WRITE(STATE) WRITE(X_STEP_PIN,STATE)
#endif
#define X_STEP_READ READ(X_STEP_PIN)
// Y Stepper
@ -162,7 +166,11 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define Y_DIR_READ READ(Y_DIR_PIN)
#endif
#define Y_STEP_INIT SET_OUTPUT(Y_STEP_PIN)
#define Y_STEP_WRITE(STATE) WRITE(Y_STEP_PIN,STATE)
#if AXIS_IS_TMC(Y) && ENABLED(SQUARE_WAVE_STEPPING)
#define Y_STEP_WRITE(STATE) do { if (STATE) TOGGLE(Y_STEP_PIN); } while(0)
#else
#define Y_STEP_WRITE(STATE) WRITE(Y_STEP_PIN,STATE)
#endif
#define Y_STEP_READ READ(Y_STEP_PIN)
// Z Stepper
@ -197,7 +205,11 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define Z_DIR_READ READ(Z_DIR_PIN)
#endif
#define Z_STEP_INIT SET_OUTPUT(Z_STEP_PIN)
#define Z_STEP_WRITE(STATE) WRITE(Z_STEP_PIN,STATE)
#if AXIS_IS_TMC(Z) && ENABLED(SQUARE_WAVE_STEPPING)
#define Z_STEP_WRITE(STATE) do { if(STATE) TOGGLE(Z_STEP_PIN); } while(0)
#else
#define Z_STEP_WRITE(STATE) WRITE(Z_STEP_PIN,STATE)
#endif
#define Z_STEP_READ READ(Z_STEP_PIN)
// X2 Stepper
@ -233,7 +245,12 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define X2_DIR_READ READ(X2_DIR_PIN)
#endif
#define X2_STEP_INIT SET_OUTPUT(X2_STEP_PIN)
#define X2_STEP_WRITE(STATE) WRITE(X2_STEP_PIN,STATE)
#if AXIS_IS_TMC(X2) && ENABLED(SQUARE_WAVE_STEPPING)
#define X2_STEP_WRITE(STATE) do { if(STATE) TOGGLE(X2_STEP_PIN); } while(0)
#else
#define X2_STEP_WRITE(STATE) WRITE(X2_STEP_PIN,STATE)
#endif
#define X2_STEP_READ READ(X2_STEP_PIN)
#endif
@ -270,7 +287,12 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define Y2_DIR_READ READ(Y2_DIR_PIN)
#endif
#define Y2_STEP_INIT SET_OUTPUT(Y2_STEP_PIN)
#define Y2_STEP_WRITE(STATE) WRITE(Y2_STEP_PIN,STATE)
#if AXIS_IS_TMC(Y2) && ENABLED(SQUARE_WAVE_STEPPING)
#define Y2_STEP_WRITE(STATE) do { if(STATE) TOGGLE(Y2_STEP_PIN); } while(0)
#else
#define Y2_STEP_WRITE(STATE) WRITE(Y2_STEP_PIN,STATE)
#endif
#define Y2_STEP_READ READ(Y2_STEP_PIN)
#else
#define Y2_DIR_WRITE(STATE) NOOP
@ -309,7 +331,12 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define Z2_DIR_READ READ(Z2_DIR_PIN)
#endif
#define Z2_STEP_INIT SET_OUTPUT(Z2_STEP_PIN)
#define Z2_STEP_WRITE(STATE) WRITE(Z2_STEP_PIN,STATE)
#if AXIS_IS_TMC(Z2) && ENABLED(SQUARE_WAVE_STEPPING)
#define Z2_STEP_WRITE(STATE) do { if(STATE) TOGGLE(Z2_STEP_PIN); } while(0)
#else
#define Z2_STEP_WRITE(STATE) WRITE(Z2_STEP_PIN,STATE)
#endif
#define Z2_STEP_READ READ(Z2_STEP_PIN)
#else
#define Z2_DIR_WRITE(STATE) NOOP
@ -348,7 +375,12 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define Z3_DIR_READ READ(Z3_DIR_PIN)
#endif
#define Z3_STEP_INIT SET_OUTPUT(Z3_STEP_PIN)
#define Z3_STEP_WRITE(STATE) WRITE(Z3_STEP_PIN,STATE)
#if AXIS_IS_TMC(Z3) && ENABLED(SQUARE_WAVE_STEPPING)
#define Z3_STEP_WRITE(STATE) do { if(STATE) TOGGLE(Z3_STEP_PIN); } while(0)
#else
#define Z3_STEP_WRITE(STATE) WRITE(Z3_STEP_PIN,STATE)
#endif
#define Z3_STEP_READ READ(Z3_STEP_PIN)
#else
#define Z3_DIR_WRITE(STATE) NOOP
@ -386,7 +418,11 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define E0_DIR_READ READ(E0_DIR_PIN)
#endif
#define E0_STEP_INIT SET_OUTPUT(E0_STEP_PIN)
#define E0_STEP_WRITE(STATE) WRITE(E0_STEP_PIN,STATE)
#if AXIS_IS_TMC(E0) && ENABLED(SQUARE_WAVE_STEPPING)
#define E0_STEP_WRITE(STATE) do { if(STATE) TOGGLE(E0_STEP_PIN); } while(0)
#else
#define E0_STEP_WRITE(STATE) WRITE(E0_STEP_PIN,STATE)
#endif
#define E0_STEP_READ READ(E0_STEP_PIN)
// E1 Stepper
@ -421,7 +457,11 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define E1_DIR_READ READ(E1_DIR_PIN)
#endif
#define E1_STEP_INIT SET_OUTPUT(E1_STEP_PIN)
#define E1_STEP_WRITE(STATE) WRITE(E1_STEP_PIN,STATE)
#if AXIS_IS_TMC(E1) && ENABLED(SQUARE_WAVE_STEPPING)
#define E1_STEP_WRITE(STATE) do { if(STATE) TOGGLE(E1_STEP_PIN); } while(0)
#else
#define E1_STEP_WRITE(STATE) WRITE(E1_STEP_PIN,STATE)
#endif
#define E1_STEP_READ READ(E1_STEP_PIN)
// E2 Stepper
@ -456,7 +496,11 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define E2_DIR_READ READ(E2_DIR_PIN)
#endif
#define E2_STEP_INIT SET_OUTPUT(E2_STEP_PIN)
#define E2_STEP_WRITE(STATE) WRITE(E2_STEP_PIN,STATE)
#if AXIS_IS_TMC(E2) && ENABLED(SQUARE_WAVE_STEPPING)
#define E2_STEP_WRITE(STATE) do { if(STATE) TOGGLE(E2_STEP_PIN); } while(0)
#else
#define E2_STEP_WRITE(STATE) WRITE(E2_STEP_PIN,STATE)
#endif
#define E2_STEP_READ READ(E2_STEP_PIN)
// E3 Stepper
@ -491,7 +535,11 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define E3_DIR_READ READ(E3_DIR_PIN)
#endif
#define E3_STEP_INIT SET_OUTPUT(E3_STEP_PIN)
#define E3_STEP_WRITE(STATE) WRITE(E3_STEP_PIN,STATE)
#if AXIS_IS_TMC(E3) && ENABLED(SQUARE_WAVE_STEPPING)
#define E3_STEP_WRITE(STATE) do { if(STATE) TOGGLE(E3_STEP_PIN); } while(0)
#else
#define E3_STEP_WRITE(STATE) WRITE(E3_STEP_PIN,STATE)
#endif
#define E3_STEP_READ READ(E3_STEP_PIN)
// E4 Stepper
@ -526,7 +574,11 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define E4_DIR_READ READ(E4_DIR_PIN)
#endif
#define E4_STEP_INIT SET_OUTPUT(E4_STEP_PIN)
#define E4_STEP_WRITE(STATE) WRITE(E4_STEP_PIN,STATE)
#if AXIS_IS_TMC(E4) && ENABLED(SQUARE_WAVE_STEPPING)
#define E4_STEP_WRITE(STATE) do { if(STATE) TOGGLE(E4_STEP_PIN); } while(0)
#else
#define E4_STEP_WRITE(STATE) WRITE(E4_STEP_PIN,STATE)
#endif
#define E4_STEP_READ READ(E4_STEP_PIN)
// E5 Stepper
@ -561,7 +613,11 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define E5_DIR_READ READ(E5_DIR_PIN)
#endif
#define E5_STEP_INIT SET_OUTPUT(E5_STEP_PIN)
#define E5_STEP_WRITE(STATE) WRITE(E5_STEP_PIN,STATE)
#if AXIS_IS_TMC(E5) && ENABLED(SQUARE_WAVE_STEPPING)
#define E5_STEP_WRITE(STATE) do { if(STATE) TOGGLE(E5_STEP_PIN); } while(0)
#else
#define E5_STEP_WRITE(STATE) WRITE(E5_STEP_PIN,STATE)
#endif
#define E5_STEP_READ READ(E5_STEP_PIN)
/**

6
config/default/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/AlephObjects/TAZ4/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/AliExpress/UM2pExt/Configuration_adv.h
View File

@ -1763,6 +1763,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Anet/A2/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Anet/A2plus/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Anet/A6/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Anet/A8/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Anet/A8plus/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Anet/E16/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/AnyCubic/i3/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/ArmEd/Configuration_adv.h
View File

@ -1765,6 +1765,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/BIBO/TouchX/default/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/BQ/Hephestos/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/BQ/Hephestos_2/Configuration_adv.h
View File

@ -1769,6 +1769,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/BQ/WITBOX/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Cartesio/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Creality/CR-10/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Creality/CR-10S/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Creality/CR-10_5S/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Creality/CR-10mini/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Creality/CR-8/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Creality/Ender-2/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Creality/Ender-3/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Creality/Ender-4/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Einstart-S/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Felix/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/FlashForge/CreatorPro/Configuration_adv.h
View File

@ -1760,6 +1760,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/FolgerTech/i3-2020/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Formbot/Raptor/Configuration_adv.h
View File

@ -1763,6 +1763,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Formbot/T_Rex_2+/Configuration_adv.h
View File

@ -1765,6 +1765,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Formbot/T_Rex_3/Configuration_adv.h
View File

@ -1765,6 +1765,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Geeetech/A10M/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Geeetech/A20M/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Geeetech/MeCreator2/Configuration_adv.h
View File

@ -1760,6 +1760,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Infitary/i3-M508/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/JGAurora/A5/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/MakerParts/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Malyan/M150/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Malyan/M200/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Micromake/C1/enhanced/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Mks/Robin/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Mks/Sbase/Configuration_adv.h
View File

@ -1762,6 +1762,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/RapideLite/RL200/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/RigidBot/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/SCARA/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
View File

@ -1759,6 +1759,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Sanguinololu/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/TheBorg/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/TinyBoy2/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Tronxy/X3A/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Tronxy/X5S-2E/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/UltiMachine/Archim1/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/UltiMachine/Archim2/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/VORONDesign/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Velleman/K8200/Configuration_adv.h
View File

@ -1774,6 +1774,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Velleman/K8400/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/WASP/PowerWASP/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/Wanhao/Duplicator 6/Configuration_adv.h
View File

@ -1763,6 +1763,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/delta/Anycubic/Kossel/Configuration_adv.h
View File

@ -1760,6 +1760,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
View File

@ -1760,6 +1760,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/delta/FLSUN/kossel/Configuration_adv.h
View File

@ -1760,6 +1760,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
View File

@ -1760,6 +1760,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
View File

@ -1760,6 +1760,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/delta/MKS/SBASE/Configuration_adv.h
View File

@ -1760,6 +1760,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/delta/Tevo Little Monster/Configuration_adv.h
View File

@ -1760,6 +1760,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/delta/generic/Configuration_adv.h
View File

@ -1760,6 +1760,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/delta/kossel_mini/Configuration_adv.h
View File

@ -1759,6 +1759,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/delta/kossel_xl/Configuration_adv.h
View File

@ -1760,6 +1760,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/gCreate/gMax1.5+/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/makibox/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/tvrrug/Round2/Configuration_adv.h
View File

@ -1761,6 +1761,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.

6
config/examples/wt150/Configuration_adv.h
View File

@ -1762,6 +1762,12 @@
//#define Z_STALL_SENSITIVITY 8
#endif
/**
* Beta feature!
* Create a 50/50 square wave step pulse optimal for stepper drivers.
*/
//#define SQUARE_WAVE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continous reporting.