Fix up allen key settings in delta configs
This commit is contained in:
parent
3b293fc5d1
commit
e6baf8afd9
@ -536,14 +536,80 @@ const bool Z_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic
|
||||
//#define Z_PROBE_ALLEN_KEY
|
||||
|
||||
#ifdef Z_PROBE_ALLEN_KEY
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_X 30
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_Y DELTA_PRINTABLE_RADIUS
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_Z 100
|
||||
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_X -64
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_Y 56
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_Z 23
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_DEPTH 20
|
||||
// 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29,
|
||||
// if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe.
|
||||
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 30
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y DELTA_PRINTABLE_RADIUS
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE HOMING_FEEDRATE_X
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y DELTA_PRINTABLE_RADIUS
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (HOMING_FEEDRATE_X/10)
|
||||
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 // Move the probe into position
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_X
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_2_X -64.0 // Push it down
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_2_Y 56.0
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_2_Z 3.0
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_X/10)
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_3_X -64.0 // Move it up to clear
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_3_Y 56.0
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_3_Z 50.0
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_X
|
||||
|
||||
// Kossel Mini
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 35.0
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y 72.0
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE (HOMING_FEEDRATE_X/10)
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y 0.0
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (HOMING_FEEDRATE_X/10)
|
||||
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_1_X -46.0 // Move the probe into position
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_1_Y 59.0
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_1_Z 28.0
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_X
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_2_X -46.0 // Move the nozzle down further to push the probe into retracted position.
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_2_Y 59.0
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_2_Z 8.0
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_Z/10)
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_3_X -46.0 // Raise things back up slightly so we don't bump into anything
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_3_Y 59.0
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_3_Z 38.0
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_Z
|
||||
|
||||
// Kossel Pro
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_1_X -105.00 // Move left but not quite so far that we'll bump the belt
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y 0.00
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE HOMING_FEEDRATE_X
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_2_X -110.00 // Move outward to position deploy pin to the left of the arm
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y -125.00
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE HOMING_FEEDRATE_X
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_3_X 45.00 // Move right to trigger deploy pin
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_3_Y -125.00
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_3_Z 100.0
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE (HOMING_FEEDRATE_X/2)
|
||||
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_1_X 36.00 // Line up with bed retaining clip
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_1_Y -122.00
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_1_Z 75.0
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_X
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_2_X 36.00 // move down to retract probe
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_2_Y -122.00
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_2_Z 25.0
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_Z/2)
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_3_X 0.0 // return to 0,0,100
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_3_Y 0.0
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_3_Z 100.0
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_Z
|
||||
#endif
|
||||
|
||||
//If defined, the Probe servo will be turned on only during movement and then turned off to avoid jerk
|
||||
|
@ -539,14 +539,80 @@ const bool Z_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic
|
||||
//#define Z_PROBE_ALLEN_KEY
|
||||
|
||||
#ifdef Z_PROBE_ALLEN_KEY
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_X 30
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_Y DELTA_PRINTABLE_RADIUS
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_Z 100
|
||||
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_X -64
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_Y 56
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_Z 23
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_DEPTH 20
|
||||
// 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29,
|
||||
// if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe.
|
||||
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 30.0
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y DELTA_PRINTABLE_RADIUS
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE HOMING_FEEDRATE_X
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y DELTA_PRINTABLE_RADIUS
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0
|
||||
#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (HOMING_FEEDRATE_X/10)
|
||||
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 // Move the probe into position
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_X
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_2_X -64.0 // Push it down
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_2_Y 56.0
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_2_Z 3.0
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_X/10)
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_3_X -64.0 // Move it up to clear
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_3_Y 56.0
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_3_Z 50.0
|
||||
#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_X
|
||||
|
||||
// Kossel Mini
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 35.0
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y 72.0
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE (HOMING_FEEDRATE_X/10)
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y 0.0
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (HOMING_FEEDRATE_X/10)
|
||||
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_1_X -46.0 // Move the probe into position
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_1_Y 59.0
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_1_Z 28.0
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_X
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_2_X -46.0 // Move the nozzle down further to push the probe into retracted position.
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_2_Y 59.0
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_2_Z 8.0
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_Z/10)
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_3_X -46.0 // Raise things back up slightly so we don't bump into anything
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_3_Y 59.0
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_3_Z 38.0
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_Z
|
||||
|
||||
// Kossel Pro
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_1_X -105.00 // Move left but not quite so far that we'll bump the belt
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y 0.00
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE HOMING_FEEDRATE_X
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_2_X -110.00 // Move outward to position deploy pin to the left of the arm
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y -125.00
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE HOMING_FEEDRATE_X
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_3_X 45.00 // Move right to trigger deploy pin
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_3_Y -125.00
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_3_Z 100.0
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE (HOMING_FEEDRATE_X/2)
|
||||
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_1_X 36.00 // Line up with bed retaining clip
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_1_Y -122.00
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_1_Z 75.0
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE HOMING_FEEDRATE_X
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_2_X 36.00 // move down to retract probe
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_2_Y -122.00
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_2_Z 25.0
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (HOMING_FEEDRATE_Z/2)
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_3_X 0.0 // return to 0,0,100
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_3_Y 0.0
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_3_Z 100.0
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE HOMING_FEEDRATE_Z
|
||||
#endif
|
||||
|
||||
//If defined, the Probe servo will be turned on only during movement and then turned off to avoid jerk
|
||||
|
@ -576,13 +576,13 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
|
||||
// 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29,
|
||||
// if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe.
|
||||
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 30
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 30.0
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y DELTA_PRINTABLE_RADIUS
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE HOMING_FEEDRATE_X
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y DELTA_PRINTABLE_RADIUS
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0
|
||||
//#define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (HOMING_FEEDRATE_X/10)
|
||||
|
||||
//#define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 // Move the probe into position
|
||||
|
Loading…
Reference in New Issue
Block a user