Michael Moon
|
ab01658fd2
|
local configuration stuff- WATCHPERIOD causes breakage, disable. few other misc changes
|
2012-01-24 17:02:45 +11:00 |
|
Michael Moon
|
42bedb3f60
|
PROGMEM elements must be const
|
2012-01-24 15:57:42 +11:00 |
|
Michael Moon
|
a991bde523
|
enable auto-reset before programming, disable afterwards
|
2012-01-24 14:25:28 +11:00 |
|
Michael Moon
|
3e575533c5
|
get M81 working
|
2012-01-24 14:24:41 +11:00 |
|
Michael Moon
|
2ae2ead97b
|
help residency not overflow
|
2012-01-24 14:24:24 +11:00 |
|
Michael Moon
|
71dc82e0b4
|
my local configuration
|
2012-01-24 13:19:37 +11:00 |
|
Michael Moon
|
5aadc2f5ca
|
cardreader needs to include some other files
|
2012-01-24 13:19:24 +11:00 |
|
Michael Moon
|
8d0916af13
|
allow Marlin to actually compile with Makefile pulled from Sprinter and a few other modifications
|
2012-01-24 13:18:54 +11:00 |
|
Bernhard
|
157aa7f2fd
|
m115 eol fix
|
2012-01-15 20:51:49 +01:00 |
|
Bernhard
|
7aeb45303d
|
small mistake
|
2012-01-15 18:31:21 +01:00 |
|
Bernhard
|
cee5f9020a
|
added suicide pin for a power supply to the arduino that is only active if the arduino is holding high for an output.
|
2012-01-15 17:06:10 +01:00 |
|
Bernhard
|
3814bbb529
|
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
|
2011-12-26 09:28:51 +01:00 |
|
Bernhard
|
729cde4475
|
fix autostart failure if in wrong directory
|
2011-12-26 09:20:53 +01:00 |
|
Bernhard
|
396270a0de
|
fix duplicated definition of MOSI MISO pins in case motherboard==33
|
2011-12-26 09:20:21 +01:00 |
|
Bernhard
|
11f2dafc4e
|
one step closer to a functional makefile..
|
2011-12-22 16:43:28 +01:00 |
|
Bernhard
|
8463e39a4a
|
starting with sanguino arduino 1.0 compatibility
|
2011-12-22 16:11:15 +01:00 |
|
Bernhard
|
2bc160a978
|
add wiring.h, that can be used to overwrite:
arduino-0023/hardware/arduino/cores/arduino/wiring.h
this is necessary if the avr libraries are recent, but arduino is old. Alternative: newer arduino
|
2011-12-22 14:57:28 +01:00 |
|
Bernhard
|
57f9359a41
|
simplified the includes, makefile now works with arduino23
|
2011-12-22 14:55:45 +01:00 |
|
Bernhard
|
3c1a4aac2b
|
header file simplification
|
2011-12-22 12:38:50 +01:00 |
|
Bernhard
|
212515148e
|
added m240 photography support. default off
|
2011-12-22 12:11:39 +01:00 |
|
Bernhard
|
6735025428
|
cooldown
|
2011-12-22 12:02:33 +01:00 |
|
Bernhard
|
415aadf704
|
lcd panel bed support
advance and ultipanel not any more in default config
|
2011-12-22 11:45:52 +01:00 |
|
Bernhard
|
4bababf5b0
|
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
|
2011-12-22 09:22:39 +01:00 |
|
Bernhard
|
f312216e97
|
Revert "untestest commit, so I don't loose code.. features runout prevention addons"
This reverts commit 651cde8b98.
|
2011-12-22 09:22:22 +01:00 |
|
Bernhard
|
651cde8b98
|
untestest commit, so I don't loose code.. features runout prevention addons
|
2011-12-22 09:20:34 +01:00 |
|
Erik van der Zalm
|
554cc1718d
|
Fiexed E_ENABLE_PIN errors
|
2011-12-15 11:59:07 +01:00 |
|
Erik van der Zalm
|
617968ab76
|
G92 fix
|
2011-12-12 20:43:47 +01:00 |
|
Erik van der Zalm
|
84d9cf7339
|
merging
|
2011-12-12 20:35:46 +01:00 |
|
Erik van der Zalm
|
e017228569
|
Merged multiple extruder support.
Soft PWM. (Sanguinololu can also have PID temperature control)
Interrupt save WRITE for addresses > 0x0FF
|
2011-12-12 19:34:37 +01:00 |
|
Bernhard
|
3320a5b37d
|
make autotemp compatile for use without pid
|
2011-12-11 22:25:52 +01:00 |
|
Bernhard
|
06411d5c9e
|
ultralcd can now also stop the wait loop for the hot-end m109 heating when stopping sd prints.
|
2011-12-11 22:18:50 +01:00 |
|
Bernhard
|
82c99625fa
|
instant stop of sd prints from the panel.
|
2011-12-11 22:10:06 +01:00 |
|
Bernhard
|
01001b89d2
|
repaired nozzle runout prevention to not collide with automatic stepper disabeling.
|
2011-12-11 15:42:56 +01:00 |
|
Bernhard
|
88ee053af0
|
heating up santity, formarly knows as "watchdog", but renamed due to the existance of the real watchdog, works now.
|
2011-12-09 17:07:44 +01:00 |
|
Bernhard
|
b1d84d879b
|
st_synchronize back to normal..
|
2011-12-09 16:13:58 +01:00 |
|
Bernhard Kubicek
|
f6fe7143e4
|
Merge pull request #29 from k-eex/Marlin_v1
Fix M201 not saving settings in all places, so the changes did not get written into EEPROM
|
2011-12-09 06:37:42 -08:00 |
|
Bernhard
|
dde4b40fa9
|
disable steppers in runout prevention
|
2011-12-09 15:37:24 +01:00 |
|
Bernhard
|
2bc5e7ec9e
|
prevent too long extrudes, or too cold extrudes
|
2011-12-09 15:09:52 +01:00 |
|
Bernhard
|
aa4f9a6474
|
better values.
|
2011-12-09 14:09:34 +01:00 |
|
Bernhard
|
87fd249c43
|
made runout prevention independent of tempeorarily set esteps
|
2011-12-09 13:56:28 +01:00 |
|
Bernhard
|
1ec0c3b68a
|
extruder runout prevention.
|
2011-12-09 13:39:00 +01:00 |
|
Bernhard
|
5b4625f79c
|
added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing.
|
2011-12-09 12:51:08 +01:00 |
|
Bernhard
|
cc4a9cdb69
|
added autostart procedure trigger to the ultralcd menu
|
2011-12-09 12:33:00 +01:00 |
|
Bernhard
|
61c943b4bf
|
fixed the st_synchronize. it would have continued if there is only the last move of the buffer being stepped.
|
2011-12-09 12:32:31 +01:00 |
|
Keegi
|
bae1e422f6
|
Fix M201 not saving settings in all places, so the changes did not get written into EEPROM
|
2011-12-08 12:25:32 +02:00 |
|
Bernhard
|
754d2d69b2
|
z homing sound fix, for now until the actual cause is found..
|
2011-12-07 23:08:13 +01:00 |
|
Bernhard
|
986f0ba76c
|
moved <stdio.h> to more dominant location.
|
2011-12-07 20:56:47 +01:00 |
|
Bernhard
|
460b788d78
|
repaired homing position setting.
|
2011-12-07 20:54:34 +01:00 |
|
Erik van der Zalm
|
3664ed6aad
|
Merge branch 'Marlin_v1' of https://github.com/dob71/Marlin into Marlin_v1
|
2011-12-07 19:57:39 +01:00 |
|
Erik van der Zalm
|
43f5c3e82b
|
Merge branch 'Marlin_v1', remote-tracking branch 'origin/Marlin_v1' into Marlin_v1
|
2011-12-07 19:55:17 +01:00 |
|