daid303 5e3873c8db Add german MSG_RESUMING.		2012-12-25 20:53:11 +01:00
..
cardreader.cpp	The big LCD code update. This splits the display and menu implementation. Paving the way for future different displays. It also makes it easier to modify the menu structures while keeping everything consistant. Note that this most likely breaks the translations, which need to be updated.	2012-12-12 11:47:03 +01:00
cardreader.h	The big LCD code update. This splits the display and menu implementation. Paving the way for future different displays. It also makes it easier to modify the menu structures while keeping everything consistant. Note that this most likely breaks the translations, which need to be updated.	2012-12-12 11:47:03 +01:00
Configuration_adv.h	Fix typo in MANUAL_HOME_POSITION (plural S missing) and improve comments.	2012-12-11 01:54:40 -08:00
Configuration.h	Add PID functional range setting. With high powered heaters the current functional range of 10 degrees causes high overshoots as the PID needs to kick in before the temperature hits 10 degrees below target.	2012-12-12 09:08:37 +01:00
ConfigurationStore.cpp
ConfigurationStore.h	Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.	2012-12-03 12:52:00 +01:00
COPYING
create_speed_lookuptable.py
createTemperatureLookupMarlin.py
fastio.h	Use the same fastio.h definition for AT90USB1286/7 and AT90USB646/7.	2012-12-08 15:16:38 -08:00
language.h	Add german MSG_RESUMING.	2012-12-25 20:53:11 +01:00
LCD Menu Tree.pdf
LiquidCrystalRus.cpp
LiquidCrystalRus.h
Makefile	Reverted the patch by KevinOConnor, as it crashes some versions of avr-gcc and caused linking issues.	2012-12-13 12:19:12 +01:00
Marlin_main.cpp	Small changes on the LCD panel, let the speed control work better, line up the parameter edit the same as the menu, remove some unused defines, and remove the Z from the 10mm move menu.	2012-12-21 16:14:47 +01:00
Marlin.h	Fix compiling for Arduin < 1.0.0	2012-12-13 13:24:55 +01:00
Marlin.pde	Mistake there, not sure why I did that. My bad.	2012-12-05 20:23:13 +01:00
MarlinSerial.cpp	Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.	2012-12-09 01:32:09 -08:00
MarlinSerial.h	Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.	2012-12-09 01:32:09 -08:00
Menu Plans.xlsx
motion_control.cpp
motion_control.h
pins.h	Merge pull request #350 from jcrocholl/Marlin_v1	2012-12-17 02:16:31 -08:00
planner.cpp	fixed pwm generation at pin D12 and D13 when one of them is used as FAN_PIN on Sanguino, added soft pwm entry for FAN_PIN in temperature.cpp	2012-12-16 01:36:57 +01:00
planner.h
Sd2Card.cpp
Sd2Card.h
Sd2PinMap.h
SdBaseFile.cpp
SdBaseFile.h
SdFatConfig.h
SdFatStructs.h
SdFatUtil.cpp
SdFatUtil.h
SdFile.cpp
SdFile.h
SdInfo.h
SdVolume.cpp
SdVolume.h
speed_lookuptable.h
stepper.cpp	Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1	2012-12-09 23:46:42 +01:00
stepper.h
temperature.cpp	Replace the 1ms delay for 2 nops to get a 100ns delay. #259	2012-12-17 11:12:11 +01:00
temperature.h	Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.	2012-12-09 23:00:06 +01:00
thermistortables.h	Fixed #336	2012-12-12 13:08:26 +01:00
ultralcd_implementation_hitachi_HD44780.h	Small changes on the LCD panel, let the speed control work better, line up the parameter edit the same as the menu, remove some unused defines, and remove the Z from the 10mm move menu.	2012-12-21 16:14:47 +01:00
ultralcd.cpp	Small changes on the LCD panel, let the speed control work better, line up the parameter edit the same as the menu, remove some unused defines, and remove the Z from the 10mm move menu.	2012-12-21 16:14:47 +01:00
ultralcd.h	Small changes on the LCD panel, let the speed control work better, line up the parameter edit the same as the menu, remove some unused defines, and remove the Z from the 10mm move menu.	2012-12-21 16:14:47 +01:00
watchdog.cpp	Fix compiling the watchdog error message when the manual reset watchdog is used.	2012-12-06 10:27:50 +01:00
watchdog.h