| .. |
|
example_configurations
|
Cleanup, extend TMC2130 configuration
|
2017-04-14 22:43:56 -05:00 |
|
blinkm.cpp
|
|
|
|
blinkm.h
|
|
|
|
boards.h
|
Cheaptronic V2
|
2017-04-09 06:57:43 -05:00 |
|
buzzer.h
|
fixed warning: ISO C++ forbids compound-literals
|
2016-10-22 11:23:16 -05:00 |
|
cardreader.cpp
|
simplified M20 with size
|
2017-04-13 04:56:58 -05:00 |
|
cardreader.h
|
Dynamic allocation for SDCARD_SORT_ALPHA
|
2017-02-14 21:37:25 -06:00 |
|
circularqueue.h
|
|
|
|
Conditionals_LCD.h
|
Add support for SOLENOID_PROBE
|
2017-04-14 17:24:36 -05:00 |
|
Conditionals_post.h
|
Allow NO_WORKSPACE_OFFSETS with DELTA_AUTO_CALIBRATION
|
2017-04-14 21:56:49 -05:00 |
|
Conditionals.h
|
|
|
|
Configuration_adv.h
|
Cleanup, extend TMC2130 configuration
|
2017-04-14 22:43:56 -05:00 |
|
configuration_store.cpp
|
Setup to find data corruption and general clean up
|
2017-04-15 19:26:43 -05:00 |
|
configuration_store.h
|
Convert config code to a static class
|
2017-04-09 22:06:41 -05:00 |
|
Configuration.h
|
Fix some configuration spacing
|
2017-04-14 22:36:10 -05:00 |
|
dac_mcp4728.cpp
|
Fix DAC current code
|
2016-10-17 15:17:57 -05:00 |
|
dac_mcp4728.h
|
Fix DAC current code
|
2016-10-17 15:17:57 -05:00 |
|
digipot_mcp4018.cpp
|
Update SlowSoftI2CMaster link. MightyBoard digipots I2C bus has no resistors.
|
2017-04-09 06:45:03 -05:00 |
|
digipot_mcp4451.cpp
|
Add digipot i2c control for MCP4018
|
2017-04-09 06:44:53 -05:00 |
|
dogm_bitmaps.h
|
|
|
|
dogm_font_data_6x9_marlin.h
|
|
|
|
dogm_font_data_HD44780_C.h
|
|
|
|
dogm_font_data_HD44780_J.h
|
|
|
|
dogm_font_data_HD44780_W.h
|
|
|
|
dogm_font_data_ISO10646_1_tr.h
|
Improve M600 with timeout, wait for heatup.
|
2017-02-15 05:29:34 -06:00 |
|
dogm_font_data_ISO10646_1.h
|
|
|
|
dogm_font_data_ISO10646_5_Cyrillic.h
|
|
|
|
dogm_font_data_ISO10646_CN.h
|
|
|
|
dogm_font_data_ISO10646_Greek.h
|
Change font decent to -1 for tt and gr
|
2016-11-26 02:29:23 +01:00 |
|
dogm_font_data_ISO10646_Kana.h
|
|
|
|
dogm_font_data_Marlin_symbols.h
|
|
|
|
duration_t.h
|
Fix formatting of print time hours above one day
|
2017-03-01 18:55:25 +02:00 |
|
endstop_interrupts.h
|
Add and apply WITHIN macro
|
2017-03-31 09:27:48 -05:00 |
|
endstops.cpp
|
Improve motion-based endstop triggering code
|
2017-04-15 06:16:50 -05:00 |
|
endstops.h
|
guaranteed BLTouch detection
|
2017-02-11 12:01:34 -06:00 |
|
enum.h
|
Make ADC sensor reading frequency adjustable
|
2017-04-09 22:18:21 -05:00 |
|
fastio.h
|
Merge pull request #4894 from thinkyhead/rc_mightyboard_rev_e
|
2016-10-31 08:01:41 -05:00 |
|
G26_Mesh_Validation_Tool.cpp
|
UBL's Grid Based Leveling code
|
2017-04-06 19:55:41 -05:00 |
|
hex_print_routines.cpp
|
Apply coding standards to M100, break up into functions
|
2017-04-10 21:09:43 -05:00 |
|
hex_print_routines.h
|
Apply coding standards to M100, break up into functions
|
2017-04-10 21:09:43 -05:00 |
|
language_an.h
|
Updates to support 5 extruders
|
2017-04-09 03:49:16 -05:00 |
|
language_bg.h
|
Updates to support 5 extruders
|
2017-04-09 03:49:16 -05:00 |
|
language_ca.h
|
Updates to support 5 extruders
|
2017-04-09 03:49:16 -05:00 |
|
language_cn.h
|
Updates to support 5 extruders
|
2017-04-09 03:49:16 -05:00 |
|
language_cz.h
|
Updates to support 5 extruders
|
2017-04-09 03:49:16 -05:00 |
|
language_da.h
|
Updates to support 5 extruders
|
2017-04-09 03:49:16 -05:00 |
|
language_de.h
|
Updates to support 5 extruders
|
2017-04-09 03:49:16 -05:00 |
|
language_el-gr.h
|
Updates to support 5 extruders
|
2017-04-09 03:49:16 -05:00 |
|
language_el.h
|
Updates to support 5 extruders
|
2017-04-09 03:49:16 -05:00 |
|
language_en.h
|
Implement delta auto-calibration and delta_height
|
2017-04-14 19:46:31 -05:00 |
|
language_es.h
|
Updates to support 5 extruders
|
2017-04-09 03:49:16 -05:00 |
|
language_eu.h
|
Updates to support 5 extruders
|
2017-04-09 03:49:16 -05:00 |
|
language_fi.h
|
Updates to support 5 extruders
|
2017-04-09 03:49:16 -05:00 |
|
language_fr.h
|
Updates to support 5 extruders
|
2017-04-09 03:49:16 -05:00 |
|
language_gl.h
|
Updates to support 5 extruders
|
2017-04-09 03:49:16 -05:00 |
|
language_hr.h
|
Updates to support 5 extruders
|
2017-04-09 03:49:16 -05:00 |
|
language_it.h
|
Updates to support 5 extruders
|
2017-04-09 03:49:16 -05:00 |
|
language_kana_utf8.h
|
Updates to support 5 extruders
|
2017-04-09 03:49:16 -05:00 |
|
language_kana.h
|
Updates to support 5 extruders
|
2017-04-09 03:49:16 -05:00 |
|
language_nl.h
|
Updates to support 5 extruders
|
2017-04-09 03:49:16 -05:00 |
|
language_pl.h
|
Updates to support 5 extruders
|
2017-04-09 03:49:16 -05:00 |
|
language_pt_utf8.h
|
Updates to support 5 extruders
|
2017-04-09 03:49:16 -05:00 |
|
language_pt-br_utf8.h
|
Updates to support 5 extruders
|
2017-04-09 03:49:16 -05:00 |
|
language_pt-br.h
|
Updates to support 5 extruders
|
2017-04-09 03:49:16 -05:00 |
|
language_pt.h
|
Updates to support 5 extruders
|
2017-04-09 03:49:16 -05:00 |
|
language_ru.h
|
Audible feedback for settings store/load/reset
|
2017-03-22 02:15:21 -05:00 |
|
language_test.h
|
|
|
|
language_tr.h
|
Updates to support 5 extruders
|
2017-04-09 03:49:16 -05:00 |
|
language_uk.h
|
Updates to support 5 extruders
|
2017-04-09 03:49:16 -05:00 |
|
language_zh_CN.h
|
Audible feedback for settings store/load/reset
|
2017-03-22 02:15:21 -05:00 |
|
language_zh_TW.h
|
Audible feedback for settings store/load/reset
|
2017-03-22 02:15:21 -05:00 |
|
language.h
|
Header and pins changes to support 5 extruders
|
2017-04-07 10:46:36 -05:00 |
|
least_squares_fit.cpp
|
Patches to UBL
|
2017-04-08 14:59:14 -05:00 |
|
M100_Free_Mem_Chk.cpp
|
Setup to find data corruption and general clean up
|
2017-04-15 19:26:43 -05:00 |
|
macros.h
|
Fix MINIMUM_STEPPER_PULSE maths
|
2017-04-11 11:11:17 -05:00 |
|
Makefile
|
Merge pull request #5994 from StefanBruens/fix_Makefile_errors
|
2017-03-29 06:32:08 -05:00 |
|
Marlin_main.cpp
|
Setup to find data corruption and general clean up
|
2017-04-15 19:26:43 -05:00 |
|
Marlin.h
|
Allow NO_WORKSPACE_OFFSETS with DELTA_AUTO_CALIBRATION
|
2017-04-14 21:56:49 -05:00 |
|
Marlin.ino
|
TMC2130 Library: @teemuatlut replaces @makertum
|
2017-03-07 04:22:06 -06:00 |
|
MarlinConfig.h
|
|
|
|
MarlinSerial.cpp
|
Patch MarlinSerial to match up with 32-bit version
|
2017-04-02 04:39:18 -05:00 |
|
MarlinSerial.h
|
Patch MarlinSerial to match up with 32-bit version
|
2017-04-02 04:39:18 -05:00 |
|
mesh_bed_leveling.cpp
|
Swap MBL z_values dimensions to [X][Y]
|
2017-04-12 17:24:05 -05:00 |
|
mesh_bed_leveling.h
|
Swap MBL z_values dimensions to [X][Y]
|
2017-04-12 17:24:05 -05:00 |
|
nozzle.cpp
|
Apply prior nozzle clean update
|
2017-03-06 03:14:59 -06:00 |
|
nozzle.h
|
General comment cleanup
|
2017-04-08 18:58:33 -05:00 |
|
pins_3DRAG.h
|
Follow-up the PR #4955, etc
|
2016-10-10 14:22:43 +09:00 |
|
pins_5DPRINT.h
|
Follow-up the PR #4955, etc
|
2016-10-10 14:22:43 +09:00 |
|
pins_AZTEEG_X1.h
|
|
|
|
pins_AZTEEG_X3_PRO.h
|
Header and pins changes to support 5 extruders
|
2017-04-07 10:46:36 -05:00 |
|
pins_AZTEEG_X3.h
|
Patch pins files hotends/e-steppers sanity check
|
2017-04-07 10:46:33 -05:00 |
|
pins_BAM_DICE_DUE.h
|
Patch pins files hotends/e-steppers sanity check
|
2017-04-07 10:46:33 -05:00 |
|
pins_BQ_ZUM_MEGA_3D.h
|
Updated bq Hephestos 2 example configuration
|
2016-12-13 09:26:07 +00:00 |
|
pins_BRAINWAVE_PRO.h
|
Follow-up the PR #4955, etc
|
2016-10-10 14:22:43 +09:00 |
|
pins_BRAINWAVE.h
|
Follow-up the PR #4955, etc
|
2016-10-10 14:22:43 +09:00 |
|
pins_CHEAPTRONIC.h
|
Follow-up the PR #4955, etc
|
2016-10-10 14:22:43 +09:00 |
|
pins_CHEAPTRONICv2.h
|
Cheaptronic V2
|
2017-04-09 06:57:43 -05:00 |
|
pins_CNCONTROLS_11.h
|
Predefine auto fan pins in some pins files
|
2016-10-26 18:38:32 -05:00 |
|
pins_CNCONTROLS_12.h
|
Predefine auto fan pins in some pins files
|
2016-10-26 18:38:32 -05:00 |
|
pins_ELEFU_3.h
|
Follow-up the PR #4955, etc
|
2016-10-10 14:22:43 +09:00 |
|
pins_FELIX2.h
|
Patch pins files hotends/e-steppers sanity check
|
2017-04-07 10:46:33 -05:00 |
|
pins_GEN3_MONOLITHIC.h
|
Follow-up the PR #4955, etc
|
2016-10-10 14:22:43 +09:00 |
|
pins_GEN3_PLUS.h
|
Follow-up the PR #4955, etc
|
2016-10-10 14:22:43 +09:00 |
|
pins_GEN6_DELUXE.h
|
|
|
|
pins_GEN6.h
|
Follow-up the PR #4955, etc
|
2016-10-10 14:22:43 +09:00 |
|
pins_GEN7_12.h
|
Label analog pins in a similar way
|
2016-10-05 06:13:30 -05:00 |
|
pins_GEN7_13.h
|
|
|
|
pins_GEN7_14.h
|
Follow-up the PR #4955, etc
|
2016-10-10 14:22:43 +09:00 |
|
pins_GEN7_CUSTOM.h
|
Follow-up the PR #4955, etc
|
2016-10-10 14:22:43 +09:00 |
|
pins_K8200.h
|
|
|
|
pins_K8400.h
|
Disable SD Detect for K8400
|
2016-12-28 23:21:18 +01:00 |
|
pins_LEAPFROG.h
|
Follow-up the PR #4955, etc
|
2016-10-10 14:22:43 +09:00 |
|
pins_MEGACONTROLLER.h
|
Patch pins files hotends/e-steppers sanity check
|
2017-04-07 10:46:33 -05:00 |
|
pins_MEGATRONICS_2.h
|
Follow-up the PR #4955, etc
|
2016-10-10 14:22:43 +09:00 |
|
pins_MEGATRONICS_3.h
|
Never define SLED_PIN
|
2017-04-14 16:36:32 -05:00 |
|
pins_MEGATRONICS.h
|
Follow-up the PR #4955, etc
|
2016-10-10 14:22:43 +09:00 |
|
pins_MELZI_MAKR3D.h
|
#if defined => #ifdef / PIN_EXISTS
|
2017-03-22 20:51:11 -05:00 |
|
pins_MELZI.h
|
#if defined => #ifdef / PIN_EXISTS
|
2017-03-22 20:51:11 -05:00 |
|
pins_MIGHTYBOARD_REVE.h
|
Add RepRapDiscount Full Graphic Smart Controller support to MIGHTYBOARD REVE
|
2017-04-09 06:44:53 -05:00 |
|
pins_MINIRAMBO.h
|
Follow-up the PR #4955, etc
|
2016-10-10 14:22:43 +09:00 |
|
pins_MINITRONICS.h
|
Patch pins files hotends/e-steppers sanity check
|
2017-04-07 10:46:33 -05:00 |
|
pins_MKS_13.h
|
Patch pins files hotends/e-steppers sanity check
|
2017-04-07 10:46:33 -05:00 |
|
pins_MKS_BASE.h
|
Patch pins files hotends/e-steppers sanity check
|
2017-04-07 10:46:33 -05:00 |
|
pins_OMCA_A.h
|
Follow-up the PR #4955, etc
|
2016-10-10 14:22:43 +09:00 |
|
pins_OMCA.h
|
Follow-up the PR #4955, etc
|
2016-10-10 14:22:43 +09:00 |
|
pins_PRINTRBOARD_REVF.h
|
Follow-up the PR #4955, etc
|
2016-10-10 14:22:43 +09:00 |
|
pins_PRINTRBOARD.h
|
Follow-up the PR #4955, etc
|
2016-10-10 14:22:43 +09:00 |
|
pins_RAMBO.h
|
Never define SLED_PIN
|
2017-04-14 16:36:32 -05:00 |
|
pins_RAMPS_13.h
|
|
|
|
pins_RAMPS_OLD.h
|
Follow-up the PR #4955, etc
|
2016-10-10 14:22:43 +09:00 |
|
pins_RAMPS.h
|
Never define SLED_PIN
|
2017-04-14 16:36:32 -05:00 |
|
pins_RIGIDBOARD_V2.h
|
# This is a combination of 2 commits.
|
2017-04-06 16:16:27 -05:00 |
|
pins_RIGIDBOARD.h
|
Remove BEEPER_PIN override in pins_RIGIDBOARD.h
|
2017-03-01 18:26:29 -06:00 |
|
pins_RUMBA.h
|
Patch pins files hotends/e-steppers sanity check
|
2017-04-07 10:46:33 -05:00 |
|
pins_SAINSMART_2IN1.h
|
Patch pins files hotends/e-steppers sanity check
|
2017-04-07 10:46:33 -05:00 |
|
pins_SANGUINOLOLU_11.h
|
Never define SLED_PIN
|
2017-04-14 16:36:32 -05:00 |
|
pins_SANGUINOLOLU_12.h
|
#if defined => #ifdef / PIN_EXISTS
|
2017-03-22 20:51:11 -05:00 |
|
pins_SAV_MKI.h
|
Follow-up the PR #4955, etc
|
2016-10-10 14:22:43 +09:00 |
|
pins_SCOOVO_X9H.h
|
Never define SLED_PIN
|
2017-04-14 16:36:32 -05:00 |
|
pins_SETHI.h
|
Follow-up the PR #4955, etc
|
2016-10-10 14:22:43 +09:00 |
|
pins_STB_11.h
|
#if defined => #ifdef / PIN_EXISTS
|
2017-03-22 20:51:11 -05:00 |
|
pins_TEENSY2.h
|
Follow-up the PR #4955, etc
|
2016-10-10 14:22:43 +09:00 |
|
pins_TEENSYLU.h
|
Follow-up the PR #4955, etc
|
2016-10-10 14:22:43 +09:00 |
|
pins_ULTIMAIN_2.h
|
Follow-up the PR #4955, etc
|
2016-10-10 14:22:43 +09:00 |
|
pins_ULTIMAKER_OLD.h
|
Follow-up the PR #4955, etc
|
2016-10-10 14:22:43 +09:00 |
|
pins_ULTIMAKER.h
|
Follow-up the PR #4955, etc
|
2016-10-10 14:22:43 +09:00 |
|
pins.h
|
Cheaptronic V2
|
2017-04-09 06:57:43 -05:00 |
|
pinsDebug_list.h
|
Updates to support 5 extruders
|
2017-04-09 03:49:16 -05:00 |
|
pinsDebug_Teensyduino.h
|
Remove extraneous whitespace
|
2017-03-18 03:17:39 -05:00 |
|
pinsDebug.h
|
Cleanup following Pins Debug update
|
2017-04-08 18:59:57 -05:00 |
|
planner_bezier.cpp
|
Improve planner kinematics, fix delta ABL
|
2016-10-09 13:32:46 -05:00 |
|
planner_bezier.h
|
|
|
|
planner.cpp
|
Simplify stepper macros by renaming enable/disable macros
|
2017-04-11 11:10:26 -05:00 |
|
planner.h
|
Cleanup to planner.cpp
|
2017-03-29 06:48:07 -05:00 |
|
platformio.ini
|
Move platformio directories out of source tree
|
2016-10-08 13:45:26 -04:00 |
|
point_t.h
|
|
|
|
printcounter.cpp
|
General comment cleanup
|
2017-04-08 18:58:33 -05:00 |
|
printcounter.h
|
General comment cleanup
|
2017-04-08 18:58:33 -05:00 |
|
qr_solve.cpp
|
|
|
|
qr_solve.h
|
|
|
|
SanityCheck.h
|
Cleanup, extend TMC2130 configuration
|
2017-04-14 22:43:56 -05:00 |
|
Sd2Card.cpp
|
Fix SD_CHECK_AND_RETRY condition
|
2017-02-11 23:55:56 -06:00 |
|
Sd2Card.h
|
|
|
|
SdBaseFile.cpp
|
Clear dir_t size, not pointer size
|
2016-10-25 22:59:40 -05:00 |
|
SdBaseFile.h
|
|
|
|
SdFatConfig.h
|
|
|
|
SdFatStructs.h
|
|
|
|
SdFatUtil.cpp
|
|
|
|
SdFatUtil.h
|
|
|
|
SdFile.cpp
|
|
|
|
SdFile.h
|
|
|
|
SdInfo.h
|
|
|
|
SdVolume.cpp
|
|
|
|
SdVolume.h
|
|
|
|
serial.cpp
|
Relocate serial macros and functions
|
2017-04-02 01:05:25 -05:00 |
|
serial.h
|
Macros to print floats, hiding imprecision
|
2017-04-09 03:48:40 -05:00 |
|
servo.cpp
|
Additional cleanup of UBL code
|
2017-03-22 20:51:10 -05:00 |
|
servo.h
|
Add macros for delays by machine cycle
|
2017-04-11 09:18:32 -05:00 |
|
softspi.h
|
Fix variant conditional for 1284p
|
2017-04-14 18:46:09 +01:00 |
|
speed_lookuptable.h
|
Spacing, cleanup in speed_lookuptable.h
|
2016-12-19 14:52:45 -08:00 |
|
spi.h
|
Add software spi support for max6675
|
2017-04-09 06:44:53 -05:00 |
|
stepper_dac.cpp
|
# This is a combination of 2 commits.
|
2017-04-06 16:16:27 -05:00 |
|
stepper_dac.h
|
Cleanup of code style
|
2016-10-07 15:57:24 -05:00 |
|
stepper_indirection.cpp
|
Cleanup, extend TMC2130 implementation
|
2017-04-14 23:00:00 -05:00 |
|
stepper_indirection.h
|
Updates to support 5 extruders
|
2017-04-09 03:49:16 -05:00 |
|
stepper.cpp
|
Reorder Conditionals_post.h and add comments
|
2017-04-14 18:18:21 -05:00 |
|
stepper.h
|
First draft of Unified Stepper / E Advance ISR
|
2016-12-21 01:34:39 -08:00 |
|
stopwatch.cpp
|
General comment cleanup
|
2017-04-08 18:58:33 -05:00 |
|
stopwatch.h
|
General comment cleanup
|
2017-04-08 18:58:33 -05:00 |
|
temperature.cpp
|
Make spi.h inclusion conditional
|
2017-04-15 16:22:42 +01:00 |
|
temperature.h
|
Only queue babysteps if axis is in a known position
|
2017-04-15 23:19:43 -05:00 |
|
thermistornames.h
|
Add Thermistor 75: MGB18 silicon pad
|
2017-03-18 11:35:20 -05:00 |
|
thermistortable_1.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_2.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_3.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_4.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_5.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_6.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_7.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_8.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_9.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_10.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_11.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_12.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_13.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_20.h
|
Header and pins changes to support 5 extruders
|
2017-04-07 10:46:36 -05:00 |
|
thermistortable_51.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_52.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_55.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_60.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_66.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_70.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_71.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_75.h
|
Add Thermistor 75: MGB18 silicon pad
|
2017-03-18 11:35:20 -05:00 |
|
thermistortable_110.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_147.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_998.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_999.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_1010.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_1047.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortables.h
|
Additional 5 extruders support (solenoids, microstepping)
|
2017-04-14 18:18:20 -05:00 |
|
twibus.cpp
|
General comment cleanup
|
2017-04-08 18:58:33 -05:00 |
|
twibus.h
|
General comment cleanup
|
2017-04-08 18:58:33 -05:00 |
|
types.h
|
|
|
|
ubl_G29.cpp
|
Setup to find data corruption and general clean up
|
2017-04-15 19:26:43 -05:00 |
|
ubl_motion.cpp
|
UBL's Grid Based Leveling code
|
2017-04-06 19:55:41 -05:00 |
|
ubl.cpp
|
Getting setup for debugging
|
2017-04-08 14:59:14 -05:00 |
|
ubl.h
|
Getting setup for debugging
|
2017-04-08 14:59:14 -05:00 |
|
ultralcd_impl_DOGM.h
|
Apply FIXFLOAT macro
|
2017-03-31 09:27:48 -05:00 |
|
ultralcd_impl_HD44780.h
|
Apply FIXFLOAT macro
|
2017-03-31 09:27:48 -05:00 |
|
ultralcd_st7920_u8glib_rrd.h
|
Add macros for delays by machine cycle
|
2017-04-11 09:18:32 -05:00 |
|
ultralcd.cpp
|
Show Cancel/Continue screen for ABL "Level Bed"
|
2017-04-15 16:51:03 -05:00 |
|
ultralcd.h
|
status_printf => lcd_status_printf_P
|
2017-04-02 01:05:25 -05:00 |
|
utf_mapper.h
|
utf8-mapper for Turkish
|
2016-12-12 15:56:59 +01:00 |
|
utility.cpp
|
Patch a display issue with LCD_DECIMAL_SMALL_XY
|
2017-04-09 10:25:35 -05:00 |
|
utility.h
|
Replace ftostr62sign with ftostr62rj
|
2016-12-12 20:25:20 +01:00 |
|
vector_3.cpp
|
Adjust vector_3 code with const, some optimization
|
2017-03-23 19:41:42 -05:00 |
|
vector_3.h
|
|
|
|
Version.h
|
Document PROTOCOL_VERSION
|
2017-03-05 04:43:46 -06:00 |
|
watchdog.cpp
|
Correct comment on watchdog timer
|
2016-12-19 22:27:28 -08:00 |
|
watchdog.h
|
|
|
