Tweak config spaces
This commit is contained in:
parent
3eacc3bfce
commit
1d574b0f6a
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -727,8 +727,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -730,8 +730,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -730,8 +730,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -730,8 +730,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -718,8 +718,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -731,8 +731,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -731,8 +731,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -722,8 +722,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -739,8 +739,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -727,8 +727,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -727,8 +727,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -727,8 +727,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -727,8 +727,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -727,8 +727,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -727,8 +727,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -727,8 +727,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -727,8 +727,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -727,8 +727,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -727,8 +727,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -727,8 +727,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -727,8 +727,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
@ -726,8 +726,8 @@
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0} // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0} // mm
|
||||
#define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm
|
||||
#define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm
|
||||
|
||||
// Comment out any sides which are unreachable by the probe. For best
|
||||
// auto-calibration results, all sides must be reachable.
|
||||
|
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue
Block a user