Henry Palonen
7f30039d2a
+ Finnish translation
2013-01-08 19:21:34 +02:00
daid303
01aac2a142
Small changes on the LCD panel, let the speed control work better, line up the parameter edit the same as the menu, remove some unused defines, and remove the Z from the 10mm move menu.
2012-12-21 16:14:47 +01:00
daid303
b69cb9fbd9
Change the end of SD cart print message from minutes/seconds to hours/minutes.
2012-12-19 12:26:40 +01:00
daid
30254e3388
Merge pull request #350 from jcrocholl/Marlin_v1
...
Automatically set *_MIN_PIN and *_MAX_PIN according to *_HOME_DIR.
2012-12-17 02:16:31 -08:00
daid303
38ee395ac7
Replace the 1ms delay for 2 nops to get a 100ns delay. #259
2012-12-17 11:12:11 +01:00
daid303
5df5e4c4a2
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2012-12-17 11:09:18 +01:00
daid303
a95dcd74e7
Fix some of the duplicated PSTRs, saving 500bytes of flash with LCD on.
2012-12-17 11:09:09 +01:00
daid
ab318beaaf
Merge pull request #348 from oni303/Marlin_v1
...
fixed (#328 ) pwm generation at pin D12 and D13
2012-12-17 02:08:28 -08:00
Johann Rocholl
8caf5d252d
Remove bogus blank line.
2012-12-16 12:50:20 -08:00
Johann Rocholl
b39f5d614a
For boards with only one endstop per axis, automatically set *_MIN_PIN and *_MAX_PIN according to *_HOME_DIR.
2012-12-16 12:09:53 -08:00
oni303
ab09fa4bbf
fixed pwm generation at pin D12 and D13 when one of them is used as FAN_PIN on Sanguino, added soft pwm entry for FAN_PIN in temperature.cpp
2012-12-16 01:36:57 +01:00
daid
83ea7dc5b9
Merge pull request #342 from setar/Marlin_v1
...
Fix the russian translation.
2012-12-14 05:04:41 -08:00
Sergey Taranenko
5697451c72
fix lcd class
2012-12-14 15:39:47 +04:00
Sergey Taranenko
58e806f3fa
Fix the russial translation.
2012-12-14 15:39:26 +04:00
Sergey Taranenko
50a5ce1dc4
deduplicate messages
2012-12-14 15:37:05 +04:00
daid303
6123a00e64
Fix the german translation.
2012-12-14 11:11:02 +01:00
daid303
7c21716886
Fixed #341
2012-12-14 10:53:11 +01:00
daid303
ae1bc83350
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2012-12-13 13:25:22 +01:00
daid303
596a7e1904
Fix compiling for Arduin < 1.0.0
2012-12-13 13:24:55 +01:00
Daid
b264317fa0
Reverted the patch by KevinOConnor, as it crashes some versions of avr-gcc and caused linking issues.
2012-12-13 12:19:12 +01:00
Daid
673577a31b
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2012-12-13 11:41:34 +01:00
Daid
23022f1a82
Updates to Makefile to compile for Teensy.
2012-12-13 11:41:27 +01:00
daid
96e9db8919
Merge pull request #339 from KevinOConnor/CompilerFlags
...
Add additional optimization flags to Makefile
2012-12-13 01:30:17 -08:00
daid303
08356361ac
Fixing a problem with heated beds not working without PID and BED_LIMIT_SWITCHING
2012-12-13 10:25:29 +01:00
daid303
047d037f8c
#ifdef fix for #326
2012-12-13 09:04:41 +01:00
Kevin O'Connor
0908458381
Use gcc "-fwhole-program" optimization.
...
Use "whole program" and "link time optimization" features of gcc. The
whole-program optimization enables the compiler to evaluate the entire
firmware for optimization instead of just one code file at a time.
This leads to better overall optimizations.
2012-12-12 23:22:35 -05:00
Kevin O'Connor
16fbb455ef
Use linker "--relax" option.
...
The "relax" option enables the linker to convert certain "call"
instructions to the smaller "rcall" instruction. This reduces the
size of the resulting binary.
2012-12-12 23:22:31 -05:00
daid303
f30b46b2a8
One more fix for #338 , I really should get a heated bed to test with.
2012-12-12 23:06:17 +01:00
daid303
65c3f1ffcd
Most likely fixing #338
2012-12-12 21:56:17 +01:00
daid303
7577717b59
Fixed #336
2012-12-12 13:08:26 +01:00
daid303
1a8f54cea1
The big LCD code update. This splits the display and menu implementation. Paving the way for future different displays. It also makes it easier to modify the menu structures while keeping everything consistant. Note that this most likely breaks the translations, which need to be updated.
2012-12-12 11:47:03 +01:00
daid303
6731c094ee
Fix compiling with just an 16x2 LCD and no buttons.
2012-12-12 11:32:33 +01:00
daid303
b99a928a80
Fix the M117 (display message on LCD) when used over USB with checksums.
2012-12-12 09:35:32 +01:00
daid303
55ba90ac19
Add PID functional range setting. With high powered heaters the current functional range of 10 degrees causes high overshoots as the PID needs to kick in before the temperature hits 10 degrees below target.
2012-12-12 09:08:37 +01:00
daid303
5ff5cee8ce
Fix the sensitive pin definitions, there where analogue numbers in the digital pin list. Also made M42 without a P function on the LED_PIN (which was otherwise a useless pin definition)
2012-12-11 14:53:53 +01:00
daid303
8b58edc70e
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2012-12-11 13:38:34 +01:00
daid
d0319d45af
Merge pull request #335 from jcrocholl/Marlin_v1
...
Fix endstop pins for Printrboard
2012-12-11 02:59:58 -08:00
Johann Rocholl
ca409e5531
Fix X/Y/Z_MIN_PIN for Printrboard.
2012-12-11 01:59:48 -08:00
Johann Rocholl
1f45cb0a51
Fix typo in MANUAL_HOME_POSITION (plural S missing) and improve comments.
2012-12-11 01:54:40 -08:00
daid303
46ec4b648c
Added some missing Mxxx comments to M commands. Fixed the unsetting of the timer dividers for the fast PWM fan.
2012-12-11 10:21:44 +01:00
Daid
724f5aa36b
Update on makefile for moved Arduino addons.
2012-12-10 12:06:30 +01:00
daid303
6d9dfa96c3
Move the Arduino related stuff out of the Marlin tree, as they are not directly related to Marlin functionality but addons for the Arduino IDE. Also split up the addons for pre 1.0.0 Arduino and post 1.0.0 Arduino.
2012-12-10 12:02:29 +01:00
daid303
3fb07d9b8d
Add MINTEMP/MAXTEMP error to LCD, and fix temperature bug with more then 1 extruder.
2012-12-10 10:48:46 +01:00
daid303
82c8724b33
Fix compile with PID_DEBUG
2012-12-09 23:50:12 +01:00
daid303
9b160972a1
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2012-12-09 23:46:42 +01:00
daid303
e036750bdf
Use the disable macros on initialization. Which fixes a bug when there is no pin defined for stepper enabled (motherboard 4)
2012-12-09 23:46:25 +01:00
Daid
fcd9de72ef
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2012-12-09 23:31:07 +01:00
Daid
32d4373e0f
Add printrboard and brainwave to Makefile.
2012-12-09 23:30:55 +01:00
daid
b3ddbcee2a
Merge pull request #329 from jcrocholl/Marlin_v1
...
Add Printrboard and Brainwave to pins.h and fastio.h
2012-12-09 14:29:26 -08:00
Daid
29435dfb4b
Proper avr for Sanguino in Makefile.
2012-12-09 23:02:03 +01:00
