croadfeldt
06f767d608
Merge remote-tracking branch 'upstream/development' into development
2015-03-30 02:10:49 -05:00
Scott Lahteine
b47fa8c064
Merge pull request #1735 from AnHardt/compilerCandy
...
Remove some further warnings
2015-03-29 23:55:19 -07:00
Scott Lahteine
85b67e5223
Merge pull request #1738 from thinkyhead/fixup_homing
...
Fix G29 E and M48 n
2015-03-29 20:08:19 -07:00
Scott Lahteine
ce44bee28b
Small code reduction
2015-03-29 19:45:14 -07:00
Scott Lahteine
0213f7f016
Cleanup case for M666
2015-03-29 19:39:43 -07:00
Scott Lahteine
803425e12c
Fix G29 E and M48 n
...
- Users prefer `G29 E` to work like `M48 E` so fixed that
- `M48 n` replaced with `M48 P` (or `p`). `n` legacy support
- Shorten some strings to save precious bytes
- Smaller code for 3-point probing
2015-03-29 18:56:09 -07:00
Scott Lahteine
1e9999711c
Merge pull request #1736 from thinkyhead/fixup_homing
...
Fix G28 homing Y with X
2015-03-29 18:27:17 -07:00
Scott Lahteine
d738b7acdd
Merge pull request #1724 from Natealus/Development
...
Viki 2 Pins from Manual and Azteeg X3 Pro Endstop Reswap
2015-03-29 18:26:32 -07:00
Scott Lahteine
e8ae51bfe3
Fix G28 homing Y with X
...
- Fixed a typo causing G28 to home incorrectly
- Added documentation to G28
- Added homeXYZ bools to neaten the code
- Added a note about home_offsets being questionable
2015-03-29 18:06:59 -07:00
AnHardt
7b2550a604
Times can't be negative.
...
cardreader.cpp needs temperature.h for autotempShutdown() when
AUTOTEMP is defined but warns about unused variables.
Unpublished variables by putting them in to temperature.cpp.
2015-03-30 01:58:46 +02:00
AnHardt
507efa771b
Remove unused variable fan_rot
...
and satisfy the compiler about the implicit compare.
2015-03-30 01:46:38 +02:00
AnHardt
2b959a7752
Some additional {} to make the compiler happy.
2015-03-30 01:42:35 +02:00
AnHardt
0f1bd6e4a7
In ST7920_SWSPI_SND_8BIT(uint8_t val) parameter is unsigned
...
therefor in macro ST7920_WRITE_BYTE(a) cast a to uint8_t
to make the compiler happy.
2015-03-30 01:40:58 +02:00
Chris Roadfeldt
a9802c95b3
Ensure Z_PROBE_PIN is defined if Z_PROBE_AND_ENDSTOP is.
2015-03-29 04:18:37 -05:00
Chris Roadfeldt
62834a1c43
Don't deploy probe on Z Axis homing if Z_PROBE_AND_ENDSTOP is enabled,
...
unless Z_SAFE_HOMING is.
2015-03-29 03:55:41 -05:00
Chris Roadfeldt
666fad3494
Typo fixed in sanity check.
2015-03-29 03:25:03 -05:00
Chris Roadfeldt
08a7aa16c5
Don't deploy Z Probe on Z homing if Z_PROBE_AND_ENDSTOP is defined.
2015-03-29 03:21:48 -05:00
Chris Roadfeldt
80285251cc
More config cleanup work for Z_PROBE_AND_ENDSTOP.
2015-03-29 03:06:20 -05:00
Chris Roadfeldt
fe4549cd83
Config file Z_PROBE_AND_ENDSTOP description clean up.
2015-03-29 03:04:59 -05:00
Chris Roadfeldt
82d2f11129
More additional sanity checks for Z_PROBE_AND_ENDSTOP
2015-03-29 02:53:55 -05:00
Chris Roadfeldt
05134f0807
Additional Sanity Checks for Z_PROBE_AND_ENDSTOP
2015-03-29 02:51:51 -05:00
Chris Roadfeldt
c75a5e8c55
Fixed typo for Z_PROBE_AND_ENDSTOP support in pins_RAMPS.h.
...
Confirmed Sanity checks are working.....
2015-03-29 02:38:08 -05:00
Chris Roadfeldt
a98ac4033b
Added Z_PROBE_PIN to #define for Z_PROBE_AND_ENDSTOP support.
2015-03-29 02:36:26 -05:00
Chris Roadfeldt
6125124d6c
Config file cleanup for Z_PROBE_AND_ENDSTOP support.
2015-03-29 02:29:16 -05:00
Chris Roadfeldt
324c14943b
Bug fixes for Z_PROBE_AND_ENDSTOP.
...
Code cleanup for Z_PROBE_AND_ENDSTOP.
Added Z_PROBE_PIN to pins_RAMPS_13.h
2015-03-29 02:16:09 -05:00
Natealus
ca5821aa57
Made #ifdef DELTA branch instead
...
Another fellow here gave me the idea to do it this way
2015-03-29 01:08:00 -06:00
Natealus
04fda6b3e9
Undesired behavior with endstops swapped
...
Made my swap commented out so its the option not the default.
2015-03-29 00:55:47 -06:00
Natealus
ca1477d830
Revert "Undesired behavior with endstops swapped"
...
This reverts commit 15028e9b08
.
2015-03-29 00:52:53 -06:00
Natealus
15028e9b08
Undesired behavior with endstops swapped
...
I made my changes to swap MIN and MAX endstops on the Azteeg X3 Pro the
option rather than the default to fix unexpected reversal.
2015-03-29 00:42:40 -06:00
Nate Stokes
18245c6cd2
Update pins_RAMBO.h
...
Updated for the changes that Thinkyhead made before I submitted mine.
2015-03-28 22:29:54 -06:00
Natealus
234a9d0b12
Viki 2 Pins from Manual
...
I added in the pins into the new board files for the Azteeg X3, X3 Pro,
Printrboard, and Rambo. I'm sure it can be added for others too but
these are the manual specified pins. Just like many things here though,
I can't test for the boards other than the Azteeg X3 Pro. Hopefully it
works smoothly for everyone who happens on this nifty display. :)
2015-03-28 22:11:12 -06:00
Scott Lahteine
a22efc5f11
Merge pull request #1597 from Wurstnase/g29_auto_script
...
G29 auto script
2015-03-28 20:54:17 -07:00
Scott Lahteine
62a3da9618
Merge pull request #1723 from thinkyhead/tweak_g92
...
Tweak G92
2015-03-28 20:53:37 -07:00
Scott Lahteine
cc7a081cae
Merge pull request #1722 from Natealus/Development
...
Azteeg X3 Pro Pin Revisions
2015-03-28 20:45:55 -07:00
Scott Lahteine
afff968e88
ARRAY_BY_EXTRUDERS, shorthand to sync planner
...
- Add some documentation to planner and stepper headers
- Patch up RAMBO pins with undefs
- Add `sync_plan_position` inline to set current XYZE
- Swap indices in `extruder_offset` to fix initialization values
2015-03-28 20:33:21 -07:00
Scott Lahteine
2b0c25a091
Tweak G92 to call plan_set_position only once, yes?
2015-03-28 19:18:24 -07:00
Natealus
22bea37393
Azteeg X3 Pro Pin Revisions
...
I added the fan pins in here and left them at -1 in configuration_adv.h
and it works fine. Pinned for a 4 extruder from 1-4 and HE5 being the
controller fan, HE6 being the Extruder Auto Fan/Water pump in the Kraken
case, and HE7 being for part cooling fan. Added in descriptions for the
MIN MAX pin swap and for servo motor additions.
2015-03-28 20:14:42 -06:00
Scott Lahteine
93dc0d0518
Merge pull request #1718 from AnHardt/blink
...
Move variable blink from ultralcd.h to dogm_lcd_implementation.h
2015-03-28 16:20:33 -07:00
Scott Lahteine
4f399bf1fb
Merge pull request #1721 from thinkyhead/fixup_1699
...
Patch generic delta config
2015-03-28 16:15:09 -07:00
Scott Lahteine
edb67ea165
Patch generic delta config
...
- Addressing issue mentioned at #1699
2015-03-28 14:13:25 -07:00
AnHardt
c481c3b180
Move variable blink from ultralcd.h to dogm_lcd_implementation.h
...
to avoid warnings about unused blink.
Concentrate definitions of variables in dogm_lcd_implementation.h to one place.
Make only local used variable currentfont static.
2015-03-28 13:14:38 +01:00
Chris Roadfeldt
059052889f
Further Sanity Checks for Z_PROBE_AND_ENDSTOP.
2015-03-28 06:08:04 -05:00
Chris Roadfeldt
8b81f20c61
Filling in more places where Z_PROBE_PIN and Z_PROBE_AND_ENDSTOP need to
...
be.
Added Sanity Check for it.
Added hook so it's enabled.
2015-03-28 05:55:42 -05:00
Chris Roadfeldt
fd823449ad
Added serial message for Z Probe trigger.
2015-03-28 05:42:38 -05:00
Chris Roadfeldt
92eb8109ab
Fix declaration of old_z_probe_endstop.
2015-03-28 05:09:48 -05:00
Chris Roadfeldt
44b88b41a2
Added credit for code.
2015-03-28 05:01:04 -05:00
Chris Roadfeldt
2979b40a7a
Fixed typo in Z Probe and Endstop section.
2015-03-28 04:41:03 -05:00
Chris Roadfeldt
9f3ff14008
Enabled separate Z Probe and Z Axis endstop use at same time.
...
Typo fixes in comments in existing code.
2015-03-28 04:31:51 -05:00
Scott Lahteine
f47fc879fe
Merge pull request #1717 from thinkyhead/fixup_warnings
...
Fixup warnings
2015-03-27 22:59:49 -07:00
Scott Lahteine
29a713ea5e
Merge branch 'Development' into fixup_warnings
...
Conflicts:
Marlin/Marlin_main.cpp
2015-03-27 20:50:45 -07:00